Welcome to the quiz portion of Know Thy Client: 9 Un-Green Strategies for Delivering Better Buildings

Learning Objectives
Upon completing this course, participants will be able to:


1. Focus on a client’s values to drive sustainability solutions.
2. Define the quality of the work being delivered to underscore... Read more

This just in from Berkeley Earth. The definitive report on 2023 global temperatures. Lots of incredible graphs to peruse but the news is pretty incredible. Actual temperatures far surpassed predictions. "At the start of 2023, we foresaw only a 14% chance that 2023 would become a record warm year, and only a ~1% chance that 2023 would reach 1.5... Read more

Fluid-applied roofing materials can be added to an existing roof to extend its life and provide reflective characteristics.

BuildingGreen-Approved Roofing

Products listed by BuildingGreen have VOC levels below 50 g/l and reflective surfaces to reduce heat gain.

Energy Star requires initial reflectance of 0.65 for low slopes... Read more

I have a client that is very interested in automated shades for a mid-rise multi-family housing project. Do you have any examples of projects that have attempted this? I assume it would involve occupancy sensors and/or an over-rideable default setting dependant on sun position and temperature. I also have an MEP Engineer team that is having a... Read more

We are growing our Design Performance Group at NBBJ! We're looking for two special people right now: a senior sustainable material consultant and a senior energy analyst. Help us design the next generation of healthy, low impact buildings - this is a chance to impact across the scale of our global company and build a better future! Know anyone... Read more

Following up on one of our conversations on the vision vacuum and sustainability beyond certifications, I would like to help facilitate an offline conversation with anyone working within their firm to use the AIA COTE measures as a guiding framework in their firms/projects. Attached are my slides on my first pass at thinking about this at Page... Read more

Hi folks,

No details have been sorted out yet, but I wanted everyone to have a heads-up that the SCL Steering Group is proposing that we graduate to a full, stand-alone SCL Summit in 2020. (Until now we’ve been squeezing our Summit into the day before Greenbuild, which is good in some ways, but problematic in others—and limits our time... Read more

I’m writing to see who would be interested in collaborating during the month of December on a position paper that would be given to the incoming Biden administration, outlining things that firms in our industries (i.e. architecture, engineering and construction) would be excited to see advanced as part of Biden’s Build-Back-Better (BBB) program... Read more

All,

Can anyone suggest a product for the following situation.  We are looking to insulate existing aluminum eterior column covers that have a three inch air gap.  The issue is there is no way to remove the covers without destroying them.  we would like to cut small holes, pump in the insulation  and then cap the holes.  Can anyone... Read more

Last updated October 26th, 2022

What this policy covers

BuildingGreen, Inc. values your privacy. This notice describes what information we collect and how we use it.

To Users Resident in the European Economic Area:  This Privacy Policy will govern use of your personal information if you choose to use any... Read more

The COTE Toolkit just launched on AIA.org's site, please go and check it out and share with your networks. The project spanned over the last year+ with over 40 authors, subject matter experts, and reviewers contributing to the process, (including many Green Gurus!)

With the goal of closing the information gap to designing high... Read more

This is the body field.

Does anyone up here do or have familiarity with anyone who regularly does NEPA EIS? If you need a definition for the acronym, please see here: https://www.epa.gov/nepa/national-environmental-policy-act-review-process#EIS. I've been asked if I know anything about it, to which the answer is no, but I'd like to get smarter about it and I'm hoping... Read more

Hi All, 

The rural concrete supplier that is used for most of our projects sources their fly ash from a nearby coal burning plant that is scheduled to be closed in the next two years. In anticipation of this, they are looking into alternative fly ash sources and SCM options and we'd like to provide suggestions.

Does anyone have... Read more

Congrats, Kjell, on your elevation into the AIA College of Fellows! Much deserved!

Welcome to the quiz portion of Re-Framing Sustainability: Green Structural Engineering.

Learning Objectives
Upon completing this course, participants will be able to:


1. List at least three design approaches to green structural engineering.
2. Recognize two issues that would encourage owners to invest in... Read more

Have any of you relied on Green Badger for LEED documentation on projects?

I am familiar with the tool and know Tommy from my time in Atlanta, but have not used it on a construction project.

Have you found value? Thoughts?

Either way, they publish a pretty nifty "LEED v4 Construction Tool Kit" that may be useful for your... Read more

We’ve reached the maximum capacity of our venue for the Show-and-Tell next Tuesday at Greenbuild in DC. We also have a full slate of great presentations lined up. Thank you, Perkins Eastman, for hosting!

RSVP is now closed—we're looking forward to a packed house and we won't be able to let folks in who are not on the list.

We can'... Read more