Hello all, there has been a fair amount of discussion about the emerging Cove Tool for early stage energy modelling and parametric optimization at our firm. I am very curious if any of you are using this software, and if so, what are your thoughts about it? 

https://www.covetool.com/

Thanks,

Esteban Matheus

Hi folks,

On behalf of ILFI, I'm sharing a notice that the early registration deadline for the Living Product Expo in Pittsburgh is tomorrow! This is a great event for anyone interested in a deep dive into materials transparency, hazard avoidance, low-carbon products, overall innovation, and the Living Product Challenge. There will also... Read more

We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

Hey all - sorry I won't be able to join our call today. I had a client request an emergency meeting today (boo) because corporate mandated that they eliminate fossil fuel use from all their buildings (yay!) by 2025 and they've got a project underway that needs to pivot quickly. 

Had I been able to join, I wanted to share this in case... Read more

I'm sure if I hop in the way back machine I could look in the forums and find old threads on LEED GA and LEED AP study resources, but I also know that material comes in and out of date. Has anyone found a good, current solution for firmwide LEED study materials?

We used to have some GBES resources, but those are intended to be person-... Read more

Thanks to SERA especially David, Kira and Clark for an inspirational conversation with Paul Hawken about his latest book. I know I needed a positive perspective! Then I found this great "Regeneration Anthem" song and had to share.

https://regeneration.org/news/210915-we-can-change-world-regeneration-an...

Happy Fall to all.

I am very interested to understand the deployment of LED temp jobsite lighting on a national level.  I think this all goes back to the low emitting jobsite.

1. Does your firm utilize temp jobsite lighting on your projects?  

2. Is this every project or a percentage of projects?

3. In your state or area is it prevalent, one... Read more

I have to admit that I wasn't particularly paying attention to LEED during Greenbuild, but anyone recall the "big announcement by USGBC" that LEED v4.1 is coming?

Article can be found @ Green Building Law Update by Stuart Kaplow and the title is "LEED v4.1 Announced by USGBC at Greenbuild."

https://www.greenbuildinglawupdate.com/... Read more

Welcome to the quiz portion of "How to Access the Full Power of Biophilia."

Learning Objectives
Upon completing this course, participants will be able to:


hi all! I'm almost at the finish line with this year's 2030 reporting...whew. I'm running into an issue that I wanted to throw out to this group, regarding the zero tool and national average baselines. Hoping some of y'all who manage your firm's 2030 data, or are just more familiar with CBECS and related data, have some insight / experience to... Read more

Hey Peer Network! Curious, if we can crowd-source a solution here for the pervious pavers at our Omaha office (climate zone 5A). Apparently over the years we've tried to add different kinds of fill here (gravel) but it keeps... disappearing. Any recommendations with either a replacement product or fill item? 

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Hi folks,

With all the build-up to Greenbuild (don't miss the Tuesday Show-and-Tell if you'll be in town!), I nearly forgot about another opportunity, coming up sooner! A bunch of us will be in Cleveland in early November for the first Building Resilience conference that BuildingGreen is helping to organize with ILFI and the Resilient... Read more

Welcome to the quiz portion of What Makes a Product Green?.

Learning Objectives
Upon completing this course, participants will be able to:


1. List and describe at least three attributes that address each of the following categories: "efficient use of materials"; "responsible sourcing"; "energy and water... Read more

Hello Sustainable Design Leaders,

I am thrilled to be joining such an esteemed collective of driven thinkers and doers. I look forward to meeting some new faces and reconnecting with some familiar ones in an effort to advance sustainable design in the built environment.

Thanks,

Jonce