Does anyone have experience pursing SITES certification on an essentially a zero-lot line project?

We are required to achieve silver certification, but the project scope/phasing recently changed and the entire site/parking area was eliminated and we no longer have a green roof. It still appears we can meet silver certification as so few... Read more

Hello, All.  Do we have folks in the group who helped develop Matter - a material management tool?  With its direct connection to Mindful Materials, it would be great to gain some insight from anyone in the know!  https://matterbuild.com/#/landing 

Hello Green Gurus,

Here is the information for November's Peer Networks Webinar, Learning and Applying Evidence, Rosetta Stone: A Translational Tool for Research-Informed Practice. We hope you will join us!

Register HERE

Learning and Applying Evidence, Rosetta Stone: A Translational Tool for Research-Informed Practice... Read more

Hi all, we are embarking on an effort to standardize our LCA process in order to maintain a firmwide database of embodied carbon intensity from which we can create internal baselines and targets. I was wondering how other offices are setting boundaries for their LCA efforts. Below is our starting point. Most LCA will be conducted using Tally.... Read more

I'm guessing this is the most impactful thing any of us could do over the next couple of years. Energy Codes are far and away the biggest lever that our industry has in fighting climate change. I'm up to my eyeballs in commitments at the moment but heartily encourage you (yes, YOU!) to sign up.

...

Hi all – if any of you are... Read more

Hi all!

I'm working on my first energy positive / passive house multifamily building and trying to figure out the trash/recycling chute. I am curious what solutions you have employed to make the trash chute air tight? We have excluded the whole chute from the envelope. Do you use airtight doors (and which ones?) at each floor trash/... Read more

Related to some recent questions on site-specific sun/wind analysis and early energy modeling tools, are there any tools that account for nearby topography (like bluffs) or large buildings/vegetation in energy calculations? Or favorite methods to estimate its impact particularly during early massing studies?

Thanks,

Rachel

Hello Sustainable Advising Leaders!

I have an exciting announcement today, fall Peer Network events are now open for registration! You can see all the event details and register here!

Based on feedback we received from past events and the most recent surveys, we decided against doing one long week of events for this fall and... Read more

Does anyone subscribe to Green Badger? Do you find it valuable?

Welcome to the quiz portion of Toxic Chemicals in Buildings: How to Find and Avoid the Worst Offenders (recorded webcast).

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how key health hazards and opportunities for healthier choices vary by product category.
2. List... Read more

Join your peers and BuildingGreen February 22–26, 2021 for an all you can eat buffet week of networking, problem solving, and connecting with sustainability leaders within your industry and across the Peer Networks! During this week we will create a space for you to offer and receive support, exchange ideas and resources, and become stronger,... Read more

Hi All,

I'm working on a LEED for Schools project under 2009, and received some amorphous comments back about our Mold Prevention Plan. We used the LEEDuser template as a guide, while also referencing the EPA document the credit is based around, but the reviewers feel we haven't provided proper metrics. The EPA plan is something like... Read more

Ventilation fans, kitchen range hoods, and laboratory fume hoods can use significant amounts of energy from both the fan motor and from venting heated/cooled air out of the building—air that then has to be replaced and conditioned by energy-intensive HVAC systems.

BuildingGreen-Approved Ventilation Fans

BuildingGreen ventilation... Read more

Dear SDL: I'm writing to urge you to promote project submittals in your firm and region to the 2018 AIA COTE Top Ten  (TT) Award. The submittal deadline is 5PM EST  January 17, 2018 - coming right up!  The TT awards are one of the most recognized design awards for the general public and receive wide circulation through mainstream media.   AIA... Read more

I'm happy to announce the Call for Presenters for this year's Gulf Coast Green, taking place in Houston May 17th.  Our theme is Crossroads: Inclusive Exchange.  We are especially seeking presentations that focus on how design can engage the community and foster social bonds and social justice.  I’m sure many of you have work that is relevant,... Read more

I'm looking to compare using an electric tower crane vs a diesel generated tower crane.  I've got the average gallons/hour for the size of crane I'm looking at, but when I reached out to the crane manufacturers, they can only tell me what size electric supply I need to provide, not the kWh usage for the cranes.  I know that it varies depending... Read more