Hi All:  We are in the design phase for a 5,700 SF project in NH. The team is taking care to drive down embodied carbon where possible. It will be NZE.

A1-A3 emissions are coming in at 67.15 kgCO2e/sf, of which 11.97 kgCO2e/sf is a hot spot attributed to permeable paving and concrete pavers (a little skewed, since lot and patio sizes... Read more

Welcome to the quiz portion of The Four Core Issues to Tackle for Resilient Design (And the Programs That Can Help).

Learning Objectives
Upon completing this course, participants will be able to:


1. Use site-specific hazard analysis to evaluate a project’s resiliency demands.
2. Use climate change data to... Read more

Hello SAL Members - after last month's call, and invitation to do some thinking around the direction of the group, a few of us connected and brainstormed questions that might help guide and refine our network. It would be great to have a conversation around everyone's needs and goals, so if you could please take 5 minutes to respond to these... Read more

Hi SDL'ers, as promised I am sending information about how to support getting flame retardants out of foam insulation. I am attaching a draft letter to Foam Manufacturers, an intro to that letter giving some background and a list of From manufacturers.   Thanks, please contact if you have any questions.   Larry Strain, Siegel & Strain... Read more

Hello Sustainable Community Design Leaders,

The SDL Winter Summit (Jan 23-25, Tempe AZ) has a few spots still open, so we are excited to invite SCDL members to join! This is an opportunity to plug into the conversations happening in the Sustainable Design Leaders group, plus a possible chance to carve out some in-person SCDL time.

We are trying to figure out how we are going to meet the LEED Credit for Building Life Cycle Impact Reduction for the first time.

One approach we're trying out: We're taking the results of our Tally model and looking at potential reductions from low-carbon concrete. However, the problem I am encountering is that when I take some of our... Read more

Greetings AEC Sustainability Leaders -

This is an update on where we stand with the BBB letter. In addition to posting this to the AEC SDL (Green Gurus) Forum, we are sending the same message to all current signatories by email to make sure everyone is notified. Apologies for putting two items in your inboxes!

First, please read... Read more

Greetings!

Ayers Saint Gross is in search of a Sustainable Design Coordinator to join our team. This person is anticipated to sit in any one of our offices - Baltimore; Washington, DC; Tempe, Arizona; or Austin, Texas. Fit and skillset are more important than geography. The position is anticipated as full-time, but if the right candidate... Read more

I can hear Kjell saying "All models are wrong, but some are useful." Having said that we are having trouble getting usuable predictive energy use information from our electrical design engineer. They are telling us that their energy models are not for accurate pEUIs but just to compare various scenarios. Are they being lazy? Should we push for... Read more

Hi friends! Despite thinking I had joined this forum on Day 1 - I hadn't! Just a quick hello and great to join you all. For anyone I don't yet know - my key focus through Sustainable Performance Institute is in helping companies institutionalize sustainability in their culture, systems and processes and helping them embark on a path of... Read more

Five types of green buildings explained. Check out this great infographic by the Pembina Institute: What do net-zero and zero-carbon buildings mean for energy use and climate pollution?

Is your team working on a LEED v4 or WELL project? 

Finding products for these projects is daunting, and even when you find products you believe will meet the requirements, you have to know exactly... Read more

CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Water and air that penetrate building assemblies can damage materials, cause energy loss, and lead to mold, mildew, or other problems. The products used to address these may contain materials that are... Read more

I am excited to share with you the final draft of the letter back to LP50 manufacturers.  The LP50 manufacturers sent their “Closing the Loop on Product Transparency” to design firms earlier this year.  For more background information, please check out Chris Hellstern's original August 20th post on this Green Gurus forum.  When we posted the... Read more

Welcome to the quiz portion of The Value of Variability.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Understand why variability is important to the comfort and well-being of building occupants.

2.  Define “alliesthesia” and explain how it relates to the well-being of occupants... Read more

Hello Sustainability Leaders,

Our next First Friday Fika* is tomorrow -- Friday, September 1st at 11am ET (8am PT). We'll meet on Zoom for some lightly structured coffee-chat time. This includes both facilitated sharing and open conversation about the topics you're interested in at the moment. Any Peer Network member who wants to say hi... Read more