Welcome to 2030 reporting season!

I brought up on the Fika today that there is a webinar December 5th to show updates to the DDx including the calculation of operational carbon from your energy data.  Below is a link to register.

https://aia.zoom.us/meeting/register/tZUocOutrTItHtWiySNMIqfGYv4ZbAhtjSg...

Hi Gurus!

I'm desperately seeking any case studies (past/currently on the boards) of labs that have been designed without natural gas infrastructure (the topic I have to debate is about commercial spec labs but any lab case study, wet or dry, is welcomed). This is for a development authority that will be setting guidelines for new... Read more

There are a number of clear finish options available, from natural oils and low-toxicity products primarily used on residential woodwork through factory-applied finishes where specific aesthetics and/or added durability are required (such as those used on cabinetry or commercial architectural millwork). Many of these have very high VOC levels,... Read more

Ali Flynn and Alejandra Arce Gomez are planning a breakout meeting for the Waste Managment Group for all interested. 

Please fill out the doodle poll below so that we can find a good time:

https://doodle.com/poll/qxd4zxrw9xzrxwc6

Ali and Alejandra have drafted an updated version of the Commitment for Waste (attached) after... Read more

Concrete and other cementitious materials have both environmental advantages and disadvantages. As builders and designers, should we be looking for alternatives or embracing concrete over competing materials?

This special report takes a look at how these materials are made, presents the key environmental considerations relating to their... Read more

Hive mind,

We recently learned that 3M has discontinued the production of their 3M Daylight Redirecting Film (https://www.3m.com/3M/en_US/building-window-solutions-us/solutions/dayli...). This product was selected by an architecture client last year as the optimal daylight/glare control strategy for a school project, and we're assisting... Read more

Is there a way for southface staff or guest experts to "pin" or "tag" the "right" answer in a forum question? It might be useful to designate the right answer and pin it to the top of a forum thread. I don't want the answer selected via crowd source but by staff or volunteers. Thanks.

Are any of you working on projects that are pursuing the additional point for Indoor Water Use Reduction on a HC project via Table 4 Compliant laboratory and medical equipment? If so, what sterilizers are the projects using?

We are receiving pushback that the Sterilizer metric doesn't make sense. I am interested in any insight or a... Read more

Thanks to those of you who signed up to share your (other) talents!!!

If you are seeing this for the first time, check out the link below to see your peers performing and if you have a talent you'd like to share (music, movement, spoken word, comedy, cooking...whatever!) send me an email (bb@sustainable-performance.org) and we'll follow... Read more

Hello All-

  We have a K-12 school project that is using a R-60 flat roof assembly as an energy & costing benchmark (along with other energy efficiency measures but this is the relevant detail to our question).  The project mechanical engineer is not onboard with a number of our energy conservation measures and has been sharing... Read more

We are T-minus two days from the ILFI unconference and I am looking forward to seeing a bunch of you there.  I have a vague memory about there being a meet up scheduled - can somebody remind me of where/when.

Also, can folks that are speaking post a reply about when their session is and what the topic is please.

Thanks in advance... Read more

We're looking to add a green wall to our existing offices in NYC. Can anyone please share any good product/vendor recommendations?

We were hoping to use Naava walls, but they seem to have retracted into Europe, as far as I can tell.

Hi, curious if anyone in the group has considered using Fitwel in an existing (built) school project (K-12). 

Would be interested in hearing your experiences and if this tool is a good fit for this type of project.

<iframe width="560" height="315" src="https://www.youtube.com/embed/7tCYQiWxxyA?si=lzTgKz9JaQ50_8HT" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe>