I have been watching LEED Zero for a while, and have appreciated certain things, but one thing I think is an absolute disaster is their allowance of mainline RECs for claiming Zero Energy and Zero Carbon performance.  I just asked this question on the LEED Zero webinar, and the panelist basically said, "it's part of LEED Zero, therefore it is... Read more

Using energy for cooling during peak hours places a large demand on utilities, is expensive, and can be less efficient than off-peak energy production.

BuildingGreen-Approved Thermal Energy Storage

BuildingGreen lists a variety of  thermal energy storage systems.

About

Off-peak cooling, or thermal energy storage (TES... Read more

Conventional stormwater management treats rain as the enemy—a dangerous and destructive force that must be deflected away from building sites as quickly as possible.

But as we pave more and more of paradise,... Read more

Welcome to the quiz portion of Innovative Products and Technology from the Greenbuild Expo

Learning Objectives
Upon completing this course, participants will be able to:


1. Direct attention to green building products and technologies that show exceptional potential, from a whole-systems perspective, to bring the... Read more

Shane, please confirm that there is a meeting this Friday (4/6) and if the time is 3:00 ET. We plan to have at least one member from our team there. Also, please forward the links/numbers for joining the meeting.

It would be helpful to know any questions you have ahead of time (if possible) so we can bring answers and what portion of... Read more

I was wondering if any design or contractor friend here can kindly share the carbon emission factor of excavation during construction. 

I found a paper that provides energy use rate per cubic meter and associated carbon emission in kgCO2 for different phase of construction such as excavation earth work, pouring and lifting concrete,... Read more

Hi folks,

As you may know, this network is part of a family of Sustainability Leader Peer Networks that BuildingGreen hosts. They each have their own private forum, and there is also a shared cross-network forum called "Green Gurus." 

Those of you have already paid in to be part of this network moving forward have automatically... Read more

Hello Sustainability Leaders,

Great to see some of you at Greenbuild last week.  Thanks to all who responded to Nadav’s post-election blues post.  Lots of helpful insights and sentiments that left me very grateful to be part of this community.  On a related note, since the election I’ve been asked by people in our office and in life if... Read more

We're looking to expand our design performance group - let Peter or me know if you have someone to recommend to us! Here's the description. 

The BuildingGreen/GreenStep exam prep materials are... Read more

Curious to see if your firms have researched metals and established a preference for what you use for roof and wall panels?  I'm interested in ranking environmental performance for painted steel, galvanize steel, weathered steel, painted aluminum, zinc, etc.

Hi everyone, 

Following November's SCL Summit, I put together a model Construction Waste Management Action Plan based on the ideas shared in our focus group. It is linked below in Google docs, so everyone should have access to live edit the plan. Please take a look and add comments if you can. It's a very rough outline, so we can... Read more

Hi SDL!

Our CM recently offered up the possibility of substituting Pozzotive into our structural and paving concrete mix (www.pozzotive.com) on a large public building. Apparently it is on a level with the cost of standard cement.
We are eager to reduce the project's embodied carbon, and this seems almost too good to be true.

SDL

Glad to see some of you at the COTE event at our studio last week.

Has anybody heard of this company and technology? https://www.enverid.com

Thanks in advance, Zach

Zach Craun, WELL AP, LEED GA

Associate

COOKFOX ARCHITECTS, DPC

250 West 57th Street

New York, NY 10107

... Read more

CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Vapor retarders are meant to protect our building assemblies from getting wet, but they can also slow drying, contributing to mold and structural degradation.

BuildingGreen-Approved Vapor Retarders

I'd love to hear thoughts from the design, consulting, and contracting firms in this group about ways to make our specs more inclusive, or at least less exclusive to minority and women owned contractors and subcontractors and others that have not had the benefit of what a recent "Equity in Specs" presenter termed the "Fathers / Brothers / In-... Read more

Can anyone suggest a recruiter that knows the trick to finding MEP talent that is passionate about sustainability? It would be much appreciated.

Team SCL,

This was a tough week. My husband coined a phrase "20% laid off."

Unfortunately, 50% of our business is currently impacted by governmental orders stating that our work is non-essential. This is bitter-sweet. I certainly want people to be safe, but we've had to make some tough decisions and in the geographies that were... Read more