I am looking for example specifications for low carbon concrete to have our structural engineer(s) review and incorporate.  Does anyone have good examples or  link(s) to good examples?

Thanks,

Mark

Has anyone had any success with achieving the LEED Building Envelope commissioning points with an alternative compliance path using the requirements of the PHIUS verifier? It seems like an unnecessary duplication to ask the client to pay for a BECx agent and a Passive House verifier. Or am I missing something? I can't find any LEED... Read more

MSA has issued a safety advisory because they have received field reports that their green colored MSA V-Gard Protective Caps are cracking. Please share this with your safety staff if they do not already know. Let's keep everyone safe!

Hi All,

As you know from the SCL Summit last year, I have been organizing a task group to create a draft of our SCL Contractor Commitment. We have come up with a short Tiered commitment draft as well as some best practices and challenges that led us to the commitment. I encourage everyone to take a look at the draft and please send any... Read more

I'm curious if anyone has used Carbon Solutions Group to buy RECs?  Or who do you use for certified off-sets?

If this is not an allowed topic on here, feel free to email me directly at Laura.soma@gly.com.

Thank you!

Greetings, SDL network - We are attempting to resolve an issue with how data center projects calculate baseline EUIs for the AIA 2030 Commitment and could use some help from this network. With projects that comply with code prescriptively (i.e. not energy modeled), we have found the default baseline assumptions within the DDx platform are not... Read more

Evaporative coolers use far less electricity than conventional refrigerant-cycle air conditioners and they operate without the use of refrigerants, both features that make them attractive for green buildings. However, their suitability is limited to drier climates, and most products use significant quantities of water.

BuildingGreen... Read more

Are any of you working on projects that are pursuing the additional point for Indoor Water Use Reduction on a HC project via Table 4 Compliant laboratory and medical equipment? If so, what sterilizers are the projects using?

We are receiving pushback that the Sterilizer metric doesn't make sense. I am interested in any insight or a... Read more

Hello SDL-ers - 

The SDL Climate-Smart Wood Group hosts a monthly online forum for builders all over North America who care about wood - and if that sounds like you, you're invited! As builders, we want to advocate for the conscientious use of wood as part of a holistic commitment to climate justice and resilience. We have been meeting... Read more

Welcome to the quiz portion of Better Steel, Lower Impacts!

Learning Objectives
Upon completing this course, participants will be able to:


Understand the process of how steel is made.

Recount how the U.S. steel industry has been improving its environmental footprint, while improving product performance.

... Read more

I'm sure may are familiar with Aqua in Chicago, and Joe Lstiburek's article on thermal bridging. (https://buildingscience.com/documents/insights/bsi062-thermal-bridges-redux) We have similar problem with a project that is a residential highrise building, concrete structure. Here is my questions. Will energy simulation be able to pick up the... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

In simpler times, our buildings were made primarily from local, natural substances like stone, wood, straw, and clay.

But lifestyles have changed dramatically since these were... Read more

Dear SD Leaders,

A friend is looking for a High Performance and Sustainability Leader to join their mid-size architecture company in New York.

If you know anyone that could be interested in this position could you please kindly send them my way?

Thank you

Marzia

Hi folks,

We often hear from you with a suggestion of someone who would be great for the network, and a question about how to refer them. We've now made that easy, with three steps laid out in an Outreach Toolkit that's posted in the left margin of the Member Directory.

So, if you're thinking of someone to invite or come across... Read more

Hi All -

With the holidays coming up and budgeting for 2023 - do we have any information on when and where a mini summit will be?  I heard rumors of Arizona?  Hoping to come but need the info as soon as I can.