Hello,

We’re looking for Design Energy Code Equivalents for Chinese commercial energy codes. Do any of you have  any good sources? I’ve only found data comparing ASHRAE 90.1 2013 to the Chinese Code at that time. We understand the Chinese code require a 65-75% energy savings over the baseline but don’t have good information for defining... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Here are the links I mentioned at today's meeting:

Timeline:
https://docs.google.com/presentation/d/1RlN4t23uvBtxEzp4QuyqL-w5bqmE4P90...

BG Contacts and Responsibilities:
https://docs.google.com/document/d/1MWYuAEitjk7Zpc8KUNf1LwG3-5wK6sIlgwro...

BITuser Contacts and Responsibilities:
https://docs.google.... Read more

All,

I've probably spoken to a few of you over the phone, but I wanted to make sure all of you know that we are hosting a 4 part webinar series on our Tally LCA software, kicking off tomorrow 10/10. We just released the new of Tally version and ended up doing far more development work than initially anticipated, in no small part due to... Read more

Hello Sustainable Advising Leaders,

Happy 2022! Here's your reminder that this network's first monthly call of the year is next Tuesday, January 25 at 3pm ET. Zoom call information is below.

All members of the network are welcome! You can see the agenda here. Here's a quick preview:

Hi Everyone, 

Our Vancouver team is looking for some innovative, high performance  building retrofit case studies. We are have been retained to retrofit a significant heritage building in Vancouver and the client has a net zero carbon institutional goal. As such we are looking for some innovative precedents that will provide design and... Read more

Has anyone completed an LCA for an engineering structures lab, particularly one that has a strong wall and strong floor? 

Colleagues:

I "lurk" on the list serve of the American Physical Plant Administrators.  I wanted to share a posting from that forum:

Hi All,

Two questions here: wondering if any Universities in the Pacific Northwest have a thermal comfort standard they adhere to for new building design on campus? UBC is currently undertaking... Read more

Jerelyn Wilson’s work with BuildingGreen started in 1985 as an owner and member of the Board of Directors. Since then, her evolving roles have included HR Director, Outreach Director, and currently CEO. She is responsible for working with mid-sized to large architecture firms to implement sustainability education, as well as professional... Read more

The construction sector’s take-make-waste approach to materials needs an overhaul. Materials and construction account for an estimated 11% of global greenhouse gas emissions annually. At the other end of the life cycle, demolition in the United States annually generates 90% of some 600 million tons of construction-sector debris. Getting trashed... Read more

Welcome to the quiz portion of Know Thy Client: 9 Un-Green Strategies for Delivering Better Buildings

Learning Objectives
Upon completing this course, participants will be able to:


1. Focus on a client’s values to drive sustainability solutions.
2. Define the quality of the work being delivered to underscore... Read more

Hi everyone, on our SDL Regional Leaders call today we touched on how different offices are engaging with the Youth Climate Strike on Sept 20, and I offered to share a few resources that we've developed:  

1) Here is our public-facing official statement/endorsement: https://www.vmdo.com/architecture-blog/vmdo-youth-climate-strike/?fbclid... Read more

Fluid-applied roofing materials can be added to an existing roof to extend its life and provide reflective characteristics.

BuildingGreen-Approved Roofing

Products listed by BuildingGreen have VOC levels below 50 g/l and reflective surfaces to reduce heat gain.

Energy Star requires initial reflectance of 0.65 for low slopes... Read more

Hello SDLs,

I'm fairly new to the group, joined in November and I must confess to being a total wallflower here, having gone almost 6 months now without introducing myself. I am an Architect with Dyer Brown Associates in Boston, MA where I head up our firm's sustainability efforts, as well as devote a fair amount of time to '... Read more

Does anyone have a Passive House detailing resource recommendation? Something that is applicable to wood over podium and/or metal framing construction? I have the book below but looking for something more applicable.

Passive House Details: Solutions for High-Performance Design 1st Edition

by Donald B. Corner (Author), Jan C.... Read more

from the Tortured by Randomness Department:

Y'all ... I was recently reminded (by Bill Reed) about a lovely quote ... and I'm keen to use it in a talk upcoming ... 

Here it is:
Place is a doorway into caring. Love of place unleashes the personal and political will needed to make profound change. It can also unite people... Read more

Hello everyone! 

A small subgroup SCL members have been working on writing a response the presentation Wes Sullens gave us at the Summit this past winter. It's been a long process but the letter and all it's reccomendations are drafted and ready to present. The group felt it prudent to post the response here first for a short public... Read more