CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Water and air that penetrate building assemblies can damage materials, cause energy loss, and lead to mold, mildew, or other problems. The products used to address these may contain materials that are... Read more

Hi everyone,

As you may know the ICC has changed the way the IECC will be written in the future and most of us think that will reduce the stringency of the future energy codes that are the biggest lever in the fight against climate change within the buildings sector.

So one of the best pathways forward is via ASHRAE, which has a... Read more

Hi, this is a somewhat niche/specific question - we are working on an all-electric school (middle and high school) that includes a chemistry lab. The lab was going to have portable sources for flame experiments, but there is concern that the portable sources would be unsafe for middle school students, so they are asking for a hard-pipe natural... Read more

Welcome to the quiz portion of Fundamentals of High-Performance Building Assemblies.

Learning Objectives
Upon completing this course, participants will be able to:


1. Recall how the acronym ENDURE speaks to the unifying aspect of high-performance buildings.
2. Describe how to apply the principles of high-... Read more

Hi All - as Environmental, Social and Governance (ESG) becomes increasingly prevalent, I'm trying to learn more about what types of requests for ESG-related information folks are actually receiving and what types of trainings on ESG would be most helpful.  Drilling down a bit, I'm curious as to how ESG data points are moving down the supply... Read more

Hi All,

I wanted to share an exciting opportinity with this esteemed group: Placetailor is seeking out a Mechanical Engineer to add to their growing team. They are located in Boston, MA and focus on Passive House, Low-energy Design, and they have for two years running meet the tenets of the AIA 2030 Commitment! This is an exciting place... Read more

It's time for our next Peer Networks webinar! Ariane wowed us with her five minutes on future climate data at the Show-and-Tell at HKS in Chicago last November. Now we'll get the deep dive.

Wednesday, May 29, 2:00 pm EDT

Register here: https://www.buildinggreen.com/peer-networks/webinars

Remember--this live webinar is for... Read more

Hello Gurus,

I’m writing to share with you an effort a small group of lighting designers from the Boston area started which is now rolling into a large scale effort.  We’ve put together a Lighting Advocacy Letter to accelerate the sustainability of lighting products. Inspired by the AIA Materials Pledge, the letter is intended to... Read more

Does anyone share the same feeling of stagnation? We are supposed to hit 80% pEUI reduction now and working towards 90% mark, but I don’t see it happening for majority of our projects, even the “right” ones that we implemented integrative design process & iterative energy modeling. I am wondering whether anyone would be willing to share... Read more

Is anyone aware of research or guidance that has looked at VOC’s from roofing products and ventilation intakes? I’ve done some searching, and focus is mainly on managing the construction process to reduce installer exposure. 

Thanks for any help!

Tate

SDL Show & Tell in Chicago, Tuesday, November 13 from 7-9:30 PM (CST)
HKS | 125 S Clark Street | Chicago, IL 60603

What better way to kick off your time at Greenbuild than with snap previews of the best sessions? The Sustainable Design Leaders Show & Tell is back, brought to you by BuildingGreen and HKS! This event is by... Read more

Hi all,

I had a position listed for a Sustainable Design Coordinator which we have down for the moment as we've taken on a fall intern instead. In the interim, however, I did have a couple of great candidates that I'd like to help find good matches. One of those candidates is Marissa Lantieri, see her resume and portolio attached.

Hi all,

The Healthy Building Network, now Habitable, was kind enough to develop printable versions of their Informed Product Guidance for us. I think these are a really great resource for design teams looking to select better product options. While the web version is great, we are using the printable version to hang select sheets around... Read more

As announced in last week's SDL/SCL Winter Summit, I have been working with a group of regional AEC professionals, industry stakeholders, and the New Buildings Institute on two code proposals to the 2021 Seattle Building Code that limit the Global Warming Potential (GWP) of concrete & steel in buildings over 50,000 sf (see attached).  We ... Read more

Air movement keeps occupants comfortable when it's warm, so cooling setpoints can be higher, and natural ventilation is a viable option even at higher temps and humidity.

BuildingGreen-Approved Ceiling Fans

BuildingGreen approves Energy Star-certified ceiling fans with ECMs—motors using electronic commutators.

Energy and... Read more

Hi folks - update here for our FUN saturday night "show"!! What a great way to start the year and celebrate new beginnings!

The Lighter Side of Green will air THIS coming Sat night at 7pm with Anne Hicks Harney MC'ing - check out the link to see the roster of amazing talent and log on for great tunes, humor, camraderie and community! ... Read more