You know all those times when you want to reply privately to someone, but don't have their email address handy? What a pain, right? 

Not anymore! Now you can go to the "Group Members" tab on the BuildingGreen Communities forum page, and hover over anyone's name to see their email address. 

Only members of the forum can see your... Read more

Hi all!

I'm working on my first energy positive / passive house multifamily building and trying to figure out the trash/recycling chute. I am curious what solutions you have employed to make the trash chute air tight? We have excluded the whole chute from the envelope. Do you use airtight doors (and which ones?) at each floor trash/... Read more

Hi everyone,

Happy new year!

The FIRST First Friday Fika* of 2024 is happening this Friday, January 5th from 11am to 12pm ET, hosted by Candace Pearson.

Here is the registration link for the Fikas, or if you've registered previously, you can use the same link for this week.

We look forward to seeing you Friday!

... Read more

Exterior doors often have poor insulation and seals that allow air through.

BuildingGreen-Approved Exterior Doors

BuildingGreen has different criteria for commercial and residential exterior doors.

Commercial swing (hinged) doors must be NFRC-rated, certified, and labeled for U-factor. They have a maximum air leakage of 0.... Read more

Related to some recent questions on site-specific sun/wind analysis and early energy modeling tools, are there any tools that account for nearby topography (like bluffs) or large buildings/vegetation in energy calculations? Or favorite methods to estimate its impact particularly during early massing studies?

Thanks,

Rachel

Happy Friday, SDL!

We're running a Tally WBLCA for an environmental education center, which has a very small floor area but a fairly robust concrete/steel structure. Still, I was surprised to find an intensity of over 1,000 kgCO2/m2 for the building.

This is way higher than the general benchmarks I've found in the CLF's database,... Read more

At our SAL call today, folks were talking about how there was just too much to read about DEI. This is the best short summary I have read about the problems of incorporating it into the organizations where we work. It's much easier to talk the talk than to walk the walk because it takes time and accountability.

Does adding solar panels reduce a building's EUI?

Existing operational use of a building is 80 kBtu/sf/year. When we add solar, it will change the source of energy but does not change the usage.

My understanding is that the EUI does not change, but it would be good to hear from others.

It's energy consumption at the point... Read more

Welcome to the quiz portion of Deep Material Vetting (That Won't Chew Through Your Design Budget).

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Align product vetting with goals that aim to mitigate occupant exposure and environmental toxicity.
2. Foster partnerships with... Read more

Hello SDL Leaders,

Over the past month, I have been working with ILFI to navigate the question of residuals in LBC compliant products vs. products reporting for a Declare label.

Through our conversations, it came to light that ILFI considers the LBC Red List threshold to be 10,000 ppm, rather than the 100 ppm written into the... Read more

The live webinar took place on May 9, 2019. If you purchased this webinar, log in to access the recording.

In this live webinar on the sustainability of wood construction, we tap the expertise of leaders in the field and look into three main issues:

The importance of certification The complex issue of embodied carbon Wood legality:... Read more

Hi,

I imagine you've already considered this, but I wanted to mention it before you cross the point of no return...

The name "BIT Building" has the potential to be misunderstood out of context because it sounds like it has something to do with Bitcoin.  I don't think this is a huge problem, but you may want to evaluate the risk... Read more

Hello everyone!

The Sustainable Design Leaders Summit will be kicking off with a Pre-Summit workshop in Seattle July 31st, 9am - 3pm. If you are interested in joining your peers for this workshop, please see the registration link below. Also, if you know someone in the Seattle area that would be good to have in the workshop and might be... Read more

Hello, I'm wondering if anyone out in the network has experience with the following:

>Low carbon concete mixes for polished concrete slabs: we're hearing concerns from our concrete supplier that using a low carbon mix design for a polished concrete slab will cause pitting. What experience do others have?

>Low carbon concrete... Read more

Hello All - It is so wonderful to virtually meet everyone and read through introductions. I'm a believer that positive change starts with groups of passionate and like-minded people organizing, and I think this group has the potential to push our industry forward, as well as offer a place for support and knowledge sharing.

I am Director... Read more