Hi Friends, 

I'm working on an SOP for construction waste management for LBC core and LBC materials petal projects and wanted to get your input on the comingled facility requirements. According to the guidelines, any waste that goes to a comingled facility must be a facility that has an average diversion rate of 80% or higher as a... Read more

Hello, 

We are becoming involved with the design/construction of a new k-12 school that is intersted in entertaining geothermal. Does anyone have payback studies on geothermal?

Thanks!

Currently, the BIT User site is fully accessible without having to log in (unless you want to edit or add content, of course). The time has come, however, to start restricting access only to logged-in users.

Which sections will be freely visible, and which will be visible only to registered users? Here's what I recall from our earlier... Read more

Boyd is part of the marketing team at BuildingGreen, where he supports analytics and social media engagement.

Boyd’s experience before joining BuildingGreen includes a decade in the paddlesports industry guiding whitewater trips as well as 5 years working in beer and wine manufacturing with a focus on customer interaction as well as... Read more

Exterior paints, stains, and primers—particularly alkyds—can have very high volatile organic compound (VOC) levels and can contain numerous chemicals of concern.

BuildingGreen-Approved Coatings

BuildingGreen lists exterior coatings that meet the South Coast Air Quality Management District’s (SCAQMD) VOC requirements of 50 grams... Read more

Was anyone else surprised to see ASHRAE 228-2023 using eGRID Subregions for both the Regional Electricity Source Energy Conversion Factor and Regional Electricity Greenhouse Gas Emission Factors? In the past I have used eGRID sub-regions but also State and local utility conversion factors depending on what energy or operational carbon story I... Read more

Hi folks,

I wanted to let people know about this webinar--I've heard it's good. If you do catch it please let us know what you think. Jason has offered to do a private version for our Peer Networks as well--I'd love to know how interested people would be in that opportunity.

November 14, 2019 from noon to 1 PM Pacific Time

... Read more

We are cautiously rekindling the age-old debate: how are we balancing modeling software for design /visualization and performance analysis during early phase of design.  

We are heavy SketchUp users for early design, and most of our staff have access to COVE tool for early performance analysis. Problem is, I’d rather use Revit to COVE... Read more

Extremely proud to say that the just-announced winner of the international 'Next Generation Facade' design competition is a team led by the 2017-18 EDR Research Fellow, Liz McCormick.   The facade normally separates inside from outside. What if the 'facade' was a place you occupied, where you worked? What if different parts of the facade... Read more

Welcome to the quiz portion of Getting Flame Retardants Out of Foam Insulation.

Learning Objectives
Upon completing this course, participants will be able to:


1. Summarize why and how flame retardants are used in foam insulation.
2. Elucidate the case for taking the chemicals out of foam insulation.
3.... Read more

The Sustainable MEP Leaders peer network brings together the most committed sustainability directors from leading MEP design firms throughout the U.S. and Canada. We invite you to apply for membership.

We look for the... Read more

I'm exploring the use of phase change material for a project. Specifically, looking at the BioPCM/ENRG Blanket product. I see on their website that ZGF used it at University of Washington. I'd love to hear any feedback from folks who have used it, and more specifically how your energy model and MEP engineer accounted for it. Thanks!! https://... Read more

Hi! We're putting together a pre-summit survey to collect input from everyone who's signed up for the Summit; we'll use that to prep the agenda for our get-together July 9-10.

Based on our last few phone calls, here's a list of topics on our radar. If there are others you'd like to see added to the survey, or if you have more thoughts... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Practitioners interested in reducing the embodied carbon of buildings are likely now used to considering the impact of different materials, like mass timber or low-carbon concrete. Low-carbon... Read more

Hi all,

We're seeing more interest and desire for outdoor work spaces, and as we consider the design implications around working outdoors, teams have been asking about wind comfort. We've tested Ingrid Cloud and now SimScale. I'm curious if anyone would recommend any other CFD tools that are geared toward architects? Also curious if... Read more

Hi All,

I wanted to share a program of superstars including many of you.  I look forward to electronically connecting and learning together.

Every Monday from June through August, the Boston Society for Architecture (BSA) and the Carbon Leadership Forum (CLF) Boston Hub will present Embodied Carbon 101, a 12-part program series in... Read more

Dear all,

A mechanical engineer on a healthcare project we are working on has asked for help in dividing the ventilation calculations between ASHRAE Standards 170 and 62.1; can anyone here help shed some light on it?

"This is the first time I am working on LEED for a hospital and I am not sure how the template wants me to show... Read more