Hi,

Are any of you attending this conference? Michelle and I are doing this low-carbon concrete/EC policy work and can't attend this conference on short notice - but if YOU are attending - we might ask a couple of small favors (collecting specific info from trade show etc)

AND/OR: if any of you have attended in the past - was it... Read more

Can furniture be hazardous? You bet it can…

From flame retardants in foam cushions to unnecessary stain and dirt repellents on upholstery materials, everyday... Read more

For more than 30 years, Alex Wilson has been the most trusted voice on energy efficiency and environmentally responsible design and construction. Since launching Environmental Building News (EBN) in 1992, he’s built a reputation, resources, and staff to provide the foundation for BuildingGreen, a consulting and information company... Read more

Has anyone worked with Vidaris for LEED certification and have a contact there? If you want to direct email me with feedback on the experience that would be helpful as well.

Dear all,

A mechanical engineer on a healthcare project we are working on has asked for help in dividing the ventilation calculations between ASHRAE Standards 170 and 62.1; can anyone here help shed some light on it?

"This is the first time I am working on LEED for a hospital and I am not sure how the template wants me to show... Read more

Hi Green Commons,

It’s been eerily quiet here since Tuesday night. I’ve been quiet mostly because I just didn’t know what to say. The election results are certainly a blow to pretty much everything we’ve been working for. There is so much we don’t know about things might play out, but I’m feeling a range of emotions ranging from... Read more

High-performance buildings integrate site-responsive orientation, climate-responsive form, hefty R-values, efficient mechanical systems, healthy... Read more

Hi Everyone,

Please mark your calendars for next Tuesday, March 17th, 2020 3pm ET (Noon PT) for an SCL webcast with Mark Chen at Skanska and Emi LaFountain at Turner Construction on Quantifying Jobsite Carbon Emissions. 

Description:

Quantifying Jobsite Carbon Emissions w/ Turner and Skanska
The focus of embodied... Read more

Hi Gang, 

We are looking to implement the contractor commitment and are running into COVID-19 protocol barriers when looking at the Jobsite Wellness category specific to the soap as well as the food storage/eating areas on site. Anyone else run into this issue? 

-Kena 

Discarded tires are an environmental disaster, and finding a beneficial use for them is a high priority.

BuildingGreen does not approve any flooring product that is made with tire-derived rubber, though some products may be appropriate for exterior use.

Pint-flush and non-water urinals can save tens of thousands of gallons of potable water per year. A single non-water-using urinal can save more than 10,000 gallons of water per year compared with the U.S. EPA standard of 1.0 gallon per flush (gpf).

When older 3.0 gpf urinals are replaced, the savings can be as great as 50,000 gallons... Read more

Hi All,

I wanted to share a program of superstars including many of you.  I look forward to electronically connecting and learning together.

Every Monday from June through August, the Boston Society for Architecture (BSA) and the Carbon Leadership Forum (CLF) Boston Hub will present Embodied Carbon 101, a 12-part program series in... Read more

Hi All,

I just tried to post a minute ago but it said my connection was lost, so I'm starting over again. You may see two similar posts from me.

Alejandra and I started a document (attached) with ideas on how we can tackle some of the issues we are currently facing with zero waste, as a follow up to our conversation last Friday... Read more

In trying to help a client write a case study on avoided carbon by using slag and flyash, I am having trouble finding a one for one equivalency that can be verified.

I have found for one pound of flyash, one pound of carbon is saved - but I can't verify that.

Appreciate the feedback!

Hi all,

We're doing some tool-related soul searching at WRNS and some folks here have raised Cove.Tool as a potentially interesting addition to our library. I'm looking for any insight you all can provide. Cove has come up various times, but curious if there's been any change for the better/worse in the past few years.

Do you use... Read more

Has anyone seen a comparison between IECC 2021 and previous versions of the energy code, including ASHRAE 2010? I'm curious how far ahead code buildings are relative to LEED v4.0, and how much the latest IECC raises the bar relative to the previous. I did a quick search for the LBNL and other studies that look at this, but didn't see anything... Read more

It’s here! By popular demand we’re re-running the SDL Salary Survey that we last ran in 2015. 

This is for people who are currently in an SD Leader role at a firm. We’re sending this invitation out on both the Green Gurus and the SD Leaders forums, because some of you are still in transition and haven’t moved into the SD Leader forum yet... Read more

Greetings SDLs - I am looking for recommendations for VLT meters that folks have had sucess with (reliability, accuracy, etc.). Are there any that art partiularly useful when in the field for existing buildings? 

Many thanks,

JD