Hi all - has anyone worked on a project with thermal energy storage tank design in the scope?  I'm wondering if anyone has recommendations for specialists or engineers who have experience.  Thanks!

Hi, all - 

Thanks to many folks who connected on the heels of our last matchmaking post. Reaching out on behalf of a former SDL member, Lindsey Perez, to relay an opportunity from MIRACORP linked below: 

https://www.paycomonline.net/v4/ats/web.php/jobs/ViewJobDetails?job=97753&clientkey=957B67314D085A633E5C9C5568F3BC04 

CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Conventional excavation practices can harm ecosystems, while improper foundation and slab drainage can allow water to build up and compromise the structure and integrity of the building.

BuildingGreen-... Read more

Related to some recent questions on site-specific sun/wind analysis and early energy modeling tools, are there any tools that account for nearby topography (like bluffs) or large buildings/vegetation in energy calculations? Or favorite methods to estimate its impact particularly during early massing studies?

Thanks,

Rachel

Hi all!

I'm working on my first energy positive / passive house multifamily building and trying to figure out the trash/recycling chute. I am curious what solutions you have employed to make the trash chute air tight? We have excluded the whole chute from the envelope. Do you use airtight doors (and which ones?) at each floor trash/... Read more

Greetings, colleagues!

Here's an opportunity for this community from AIA COTE Advocacy: US Congressman Paul Tonko (D-NY), Ranking Member of the Environment Subcommittee of the House Committee on Energy and Commerce, is looking for input from national stakeholder groups to help develop new federal climate legislation. Congressman Tonko... Read more

Curious to see if your firms have researched metals and established a preference for what you use for roof and wall panels?  I'm interested in ranking environmental performance for painted steel, galvanize steel, weathered steel, painted aluminum, zinc, etc.

Hello, I'm wondering if anyone out in the network has experience with the following:

>Low carbon concete mixes for polished concrete slabs: we're hearing concerns from our concrete supplier that using a low carbon mix design for a polished concrete slab will cause pitting. What experience do others have?

>Low carbon concrete... Read more

So our last webinar effort flamed out with the overloaded internet, but we've regrouped and have the session scheduled for this Thursday 4/2 at 1:10.  We pre-recorded the webinar to make sure everything goes smoothly and I have to say that Mike is delivering some pretty fantastic content. It doesn't engage LCA tools, rather focusing on core... Read more

I was sitting in on the USGBC's monthly Advocacy call this afternoon and heard about a state-local policy proposal to use property tax incentive for GHG reductions.  Through a state-local partnership, owners of existing residential and commercial buildings who invest in qualifying outcome-based improvements would receive a property tax... Read more

We've got a great private (BG Communities/SD Leaders) webinar lined up for December. Register now to get it on your calendar. And let us know if you have suggestions or requests for future webinar topics!

Register here

Topic: Organizing Sustainability: knowledge management as the key to high performance

Description: Corey... Read more

Is anyone else working on a project doing Living Building Challenge v4.0 Energy Petal? We're working through the Imperative 08 Net Positive Carbon Resiliency Strategy requirements that ask for the project to be habitable for a week in the event of an emergency. We're curious how others are defining "habitable" and what systems assumptions... Read more

For my first test post I'm going to be completely boring and ask about logistics.

If we know of someone that should be part of this forum, how do we invite them? There were a couple of people that I thought were on the Wiggio who I recently found out were not. There may also be folks from our regional groups who may not have been part... Read more

Happy Friday, SDL!

We're running a Tally WBLCA for an environmental education center, which has a very small floor area but a fairly robust concrete/steel structure. Still, I was surprised to find an intensity of over 1,000 kgCO2/m2 for the building.

This is way higher than the general benchmarks I've found in the CLF's database,... Read more

Hello Everyone,

We wanted to share the highlights and take-aways from the large firm Sustainable Design Leaders (SDL) 2020 Winter Summit at The Lodge at Gulf State Park, AL. Additionally, this was the first year we had a pre-summit workshop for the winter summit. Our amazing workshop facilitator, Julie Huffaker from Deeper Funner Change... Read more