Hi all, curious if anyone is involved with development / advocacy for the new MA stretch code? https://www.mass.gov/info-details/stretch-energy-code-development-2022 

My firm recently added a Boston location & I'm slowly getting to know the green building world there - would love to know if anyone is organizing public comments on the... Read more

Does anyone have experience pursing SITES certification on an essentially a zero-lot line project?

We are required to achieve silver certification, but the project scope/phasing recently changed and the entire site/parking area was eliminated and we no longer have a green roof. It still appears we can meet silver certification as so few... Read more

BuildingGreen recommends low-emitting acoustic ceilings that do not contain formaldehyde resins or PVC coatings. Look for those that have C2C Silver or Gold certifications, are Declare Red List Free, and are third-party certified for low emissions using CDPH Standard Method. We also prefer wood ceiling products with FSC certification. The... Read more

Hi all,

I'm sure many (most? all?) of us have heard the changes to LEEDv4's energy standard are coming. If this is news to you, info on the balloted measures that have passed is available online here: https://www.usgbc.org/articles/leed-v4-energy-update-approved-member-ballot.

My question to MEP friends in the Green Commons: In... Read more

I'm guessing this is the most impactful thing any of us could do over the next couple of years. Energy Codes are far and away the biggest lever that our industry has in fighting climate change. I'm up to my eyeballs in commitments at the moment but heartily encourage you (yes, YOU!) to sign up.

...

Hi all – if any of you are... Read more

Welcome to the quiz portion of 20 Ways to Advance Sustainability in the Next Four Years!

Learning Objectives
Upon completing this course, participants will be able to:


Identify the challenges to green building during a time of environmental urgency and political unrest, and find opportunity in these challenges.

... Read more

The Center for the Built Environment (CBE) at the University of California, Berkeley is conducting a survey to understand current practices and outlooks among design practitioners: architects, engineers, energy modelers, and related professionals. Our goal with this work is to improve climate change adaptation guidelines that support building... Read more

Colleagues,

As we all know, ventilation rates must be kept the same between the LEED Baseline and proposed energy models. However, we're aware of projects that have been able to claim energy savings associated to reducing ventilation using systems like Aircuity. 

Have any of you successfully claimed credit for reduced airflow due... Read more

The current Stantec/BuildingGreen featured topic is Material Health. Read on to learn the essentials, and then dive deep to earn CEUS.

Also see the Resilient Design featured topic, and also a survey of topics trending in Stantec’s regions.... Read more

I am getting started on a research project to evaluate the feasibility, costs, and benefits of using phase change material (PCM) to passively regulate temperature in Minnesota buildings. If anyone has experience designing with PCM, installing PCM, or occupying buildings with PCM, can you share any lessons learned that would be relevant as... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Concrete is one of the construction industry’s largest carbon emitters, responsible for about 5% to 8% of the world’s anthropogenic greenhouse gas emissions, yet it is also one of the most important building materials.

There are well-proven ways to reduce... Read more

Dear SDL: I'm writing to urge you to promote project submittals in your firm and region to the 2018 AIA COTE Top Ten  (TT) Award. The submittal deadline is 5PM EST  January 17, 2018 - coming right up!  The TT awards are one of the most recognized design awards for the general public and receive wide circulation through mainstream media.   AIA... Read more

Hi,

We have a market-rate housing highrise project that is going through VE right now: we need cheaper/lighter rainscreen claddings than precast concrete or GFRC.

If you've gone through this similar exercise, I would greatly appreciate recommendations for cladding manufacturers/products with EPDs available. We are open to metal... Read more

Team,

After talking to UL today, I thought it will be good for them to do a presentation on what they see in embodied energy/carbon road map of MEP equipment can be like.

Should we schedule them for a 30 minutes presentation in the next call?

Best,

LL

Hey there hive mind,

Anyone have any CxAs in the Bay Area that they'd particularly recommend? I have a project in need.

Aley

Hi all!

NESEA's BuildingEnergy Boston is happening March 28-29 at the Westin in Boston's Seaport. Would anyone like to meet up there? There are a few happy hour-like events we could meet at in the Trade show space or I'm open to other ideas! Let me know if you're interested. Here is more info: https://nesea.org/conference/buildingenergy-... Read more

As we begin to look into Scope 3 emissions reduction strategies, it's important to understand ways to reduce tranportation emissions to project sites. Is anyone aware of best practices or programs for contractor carpooling to jobsites? I know many of my colleagues travel to work together in one vehicle because of parking limitations, however,... Read more