Hi all,

Here's a good follow up to Maria's steel question on Monday.  We have a Midwest project that unfortunately (from a carbon perspective) is required to use a traditional, thick precast facade.  We’re working with the contractor and potential future (not yet bid out) fabricators to determine an appropriate % of pozzolanic material... Read more

MSA has issued a safety advisory because they have received field reports that their green colored MSA V-Gard Protective Caps are cracking. Please share this with your safety staff if they do not already know. Let's keep everyone safe!

Welcome to the quiz portion of LEED and WELL Product Labels: A Guide and Analysis!

Learning Objectives
Upon completing this course, participants will be able to:


Recognize product-related programs for LEED v4 BD+C, LEED v4.1 BD+C, WELL v1, and WELL v2 that contribute to the sustainability of projects and the health and... Read more

Hi all!

I'm working on my first energy positive / passive house multifamily building and trying to figure out the trash/recycling chute. I am curious what solutions you have employed to make the trash chute air tight? We have excluded the whole chute from the envelope. Do you use airtight doors (and which ones?) at each floor trash/... Read more

Hi, all - 

Thanks to many folks who connected on the heels of our last matchmaking post. Reaching out on behalf of a former SDL member, Lindsey Perez, to relay an opportunity from MIRACORP linked below: 

https://www.paycomonline.net/v4/ats/web.php/jobs/ViewJobDetails?job=97753&clientkey=957B67314D085A633E5C9C5568F3BC04 

Hello all,

Thank you so much for your work on the Contractor Commitment. In preparation for the Summit, we've pulled all of the sections together into one cohesive document. We would like to invite everyone in the SCL network to review and comment on this latest draft so that we can compile comments before Wednesday and make the most of... Read more

Has anyone here had success in comparing life cycle impacts for different window system options? We have been trying to compare different options but have only been able to source one expired EPD for an actual window (frame + glazing). Is the typical approach to separately compare glass and framing options? Are we missing something or is there... Read more

Pint-flush and non-water urinals can save tens of thousands of gallons of potable water per year. A single non-water-using urinal can save more than 10,000 gallons of water per year compared with the U.S. EPA standard of 1.0 gallon per flush (gpf).

When older 3.0 gpf urinals are replaced, the savings can be as great as 50,000 gallons... Read more

I'm pleased to announce that the AIA Board of Directors has unanimously adopted the A&D Materials Pledge as the AIA Materials Pledge!!!!! The support of so many of you was a key factor in making it so easy for the AIA Board to adopt The Pledge. The Materials Pledge now has 90 signatory firms, including many of yours. Thank you all.  Now,... Read more

Apologies if some of you are seeing this for the second time - on behalf of Frances Yang, Mike Gryniuk and the Carbon Leadership Forum, consider signing on in support of the SE 2050 Challenge for structural engineers. (Yes, there is an option to sign on as a non-structural engineer, in support of the program.)

http://... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

This one-hour crash course will review the concepts and key facts within the WELL Building Standard that are covered most extensively on the WELL AP exam. By... Read more

Hi all,

My office is looking at some certification options for our upcoming renovation. One thing the management team asked me that I don't have a solid answer for is, do WELL certified spaces typically go through with recertification and everything it entails, or are they doing the upfront work to get certified and then letting it lapse... Read more

I'm sure may are familiar with Aqua in Chicago, and Joe Lstiburek's article on thermal bridging. (https://buildingscience.com/documents/insights/bsi062-thermal-bridges-redux) We have similar problem with a project that is a residential highrise building, concrete structure. Here is my questions. Will energy simulation be able to pick up the... Read more

We have several projects that are small enough that we don't hire consultants to run energy models. I just received permission to do some training so that I can run these models myself. I am looking at doing this training on eQuest:

https://www.udemy.com/course/equest-energy-modelling-detailedtraining/?c...

I am thinking it would... Read more

We considering PV glazing for a project in SW Louisiana. Anyone have any successful PV glazing projects? Is this ready for primetime? 

Welcome to the quiz portion of How to Succeed with the Living Building Challenge: 12 Teams Share Tips.

Learning Objectives
Upon completing this course, participants will be able to:


1. Prepare for LBC imperatives.
2. Structure an LBC process around absolute goals, with proactive leadership and follow-through... Read more

Hi all,

Passing on a message from Julia Siple at AIA who is conducting a series of focus groups related to the AIA 2030 Commitment's DDx platform. You may have already received this from other channels but I thought I'd post here as well in case it got missed. They are looking for more participants in the morning and lunchtime (lunch... Read more

Related to some recent questions on site-specific sun/wind analysis and early energy modeling tools, are there any tools that account for nearby topography (like bluffs) or large buildings/vegetation in energy calculations? Or favorite methods to estimate its impact particularly during early massing studies?

Thanks,

Rachel