BuildingGreen Report

Forum topic

If you have a moment and are working in the IAQ arena, please consider filling out this survey, and you could also win an AirGradient ONE monitor. (Check my review video here: https://www.youtube.com/watch?v=NpqYOWLzv7o) 

https://forms.gle/ytLcq2dvtGrD2UZY7

I also have access to the results and will happily share the data whenever... Read more

Forum topic

Hi all,

We recently learned that Mass Dept of Environmental Protection (MassDEP) along with a few other state agencies are looking to offer grants for wastewater heat recovery implemented into projects. This is a newer technology that puts a heat exchanger or heat pump in the wastewater system that then extracts the heat energy and... Read more

Quiz

Welcome to the quiz portion of Can Concrete Save Us? Locking Up Carbon in Building Materials

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Explain current strategies of carbon capture and sequestration (CCS).
2. Detail how concrete offers another possible pathway to... Read more

Forum topic

Hello,

We are in the very early planning phase of a k-8 public school project to be designed and built in an economically challenged urban location with very limited site options. The project is not LEEDv4 registered yet.  We are at feasibility and costing the soil remediation, needless to say that we would really hope there would be... Read more

Forum topic

Hi Everyone!

Here is your friendly reminder for the last call to submit your Salary Survey! Here is a PDF to collect your thoughts first if that is helpful.

*This survey will be closed end of day Friday Feb. 15th.*

Important Note: There is a link to a Google Form at the end of the survey to let us know you have completed... Read more

Campus-wide Group

Forum topic

HI All,

Built Environment Plus, a green building member-based non-profit in Boston, is looking for a dynamic person to lead our expansive Education Program which includes courses taught by BuildingGreen and many others in this network. Check out the offerings here: Trainings Archive - Built Environment Plus

This is a critical and... Read more

Forum topic

Hi All,

If you have 5 minutes, we would appreciate your input in the Google Spreadsheet (linked below).  If you only have 1 minute, feel free to reply to this forum post and list your the typical equipment vendors you spec on projects.  :)

We're asking each of you to enter your "Top 3" specified vendors for each of the products... Read more

Basic page

3

Team Group

Reports, Courses, Study Guides, Live Webinars

Design assemblies that live up to their potential Course developer Peter Yost explains how high-performance assemblies are fundamentally different from traditional building assemblies.

High-performance buildings integrate site-responsive orientation, climate-responsive form, hefty R-values, efficient mechanical systems, healthy... Read more

Forum topic

Team,

See this paper regarding outside air vs. filtration.

https://www.sciencedirect.com/science/article/pii/S0360132313002515

MERV-13 is a good way to get most benefits without a huge cost.

Best,
Luke Leung

Forum topic

Hello SCL peeps, 

Thank you to all the people who filled out our 2021 event survey. Your feedback did help us narrow down the options, but it was still inconclusive about whether there’s enough interest in doing an SCL-only Summit. 

To stay on schedule with our planning (and to make sure the event will pencil out financially), we... Read more

Forum topic

Hello SDL Peers,

We are currently in the process of expanding our firmwide carbon reporting (and goal setting). I am looking to see if anyone has some "best practices" or examples of their own firm's journey to carbon neutrality. Any info or tips are welcome!

Thx, JP

Forum topic

How much does every designer need to know? How to support that basic literacy?

Guiding Questions:

Does requiring LEED-AP cover it? How do others create a shared literacy across the firm? How deeply to ask the designers to delve into technical subjects? (Or should they be paired with someone…) How do we shift the designers’ mindset... Read more

Forum topic

Hello all,

I am reaching out to this community as SMMA has a job opening for a Sustainable Design Analyst (like many of you recently posting job openings on this forum).

Here is the job posting link: https://smma.applytojob.com/apply/mah0aDkOJ0/Sustainable-Design-Analyst

Please note that this position will support... Read more

Campus-wide Group

Product Guide

Pint-flush and non-water urinals can save tens of thousands of gallons of potable water per year. A single non-water-using urinal can save more than 10,000 gallons of water per year compared with the U.S. EPA standard of 1.0 gallon per flush (gpf).

When older 3.0 gpf urinals are replaced, the savings can be as great as 50,000 gallons... Read more

Forum topic

Folks, would love to hear what software you're for in-house daylighting/energy performance modeling at the SD/DD level. My IT folks have been pushing us to try out Autodesk's Insight again after a not so impressive pilot we did a few years ago. Has it gotten better? Was it us? What programs do you feel good about? Which ones really make you mad... Read more

Forum topic

Sorry this is last minute but it just came to my mind to share this as I am looking forward to this roundtable which is happenging Wed, July27th from 12-1pm EST. 

The Built Environment Plus Women in Green Roundtable is hosting some amazing women in the industry who are working on DEI issues for a panel discussion.  The conversation... Read more