They do, seriously.  They are fine people with tons of information, and without them, all of us Architects would be, well, out of luck.

So, we first want to say THANK YOU to all of our contractor friends who took part in our Contractor Coffee Talk on Tuesday. THAT WAS AWESOME!

We learned things like:

Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

Does anyone know of reports/studies of financial benefits from the developer perspective on Passive House multifamily projects? Specifically looking for market rate (not affordable) housing examples where there is a direct market advantage (higher rents) for PH buildings. 

Welcome to the quiz portion of What Makes the Building Envelope Green? BuildingGreen’s Guide to Thermal & Moisture Protection Products.

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe attributes of the greenest building envelope products.
2. Explain how to... Read more

Building Green Peer Networks meet up @ Living Future 24

WEDNESDAY 8 May 7-830pm at Park Bar, 150 Walton, Atlanta

See you there!
 

Greetings Heat Pump Water Heater (HPWH) advocates!

We have an opportunity to advocate to the US DOE on behalf of HPWHs!

Geoff Wickes is an emerging technology product manager for NEEA (Northwest Energy Efficiency Alliance) currently focused entirely on HPWH technology, policy, and market adoption (and in full disclosure: also a... Read more

You currently have a Premium membership

Your annual membership will automatically renew on 5/25/2016 (cancel auto-renew)

CHANGE YOUR PLAN

UPGRADECANCEL

We are looking for colleagues from other firms to join a conference session proposal on "Dirt cheap Net Zero" for the ASHRAE / IBPSA conference (August 12-14, 2020, Chicago). 

We just had the grand opening of our first project designed to achieve net zero, a 50-unit affordable housing project, where we upgraded from the minimums required... Read more

Here is a fundamental question regarding measuring operational carbon emissions that I'm sure many of you can clarify for me:  Let's say you are considering design options and you want to know the relative contribution of GWP of adding an additional inch of continuous insulation to the building envelope.  The GWP from embodied carbon will... Read more

We are looking at installing an aerobic biodigester in a commercial kitchen for an office client that is VERY concerned about zero waste.  Basically, this system takes food waste, treats it with micro-organisms to remove organic matter, and turns it into water of high enough quality to go straight to the sewer.  The manufacturer we are looking... Read more

Hi folks,

I’m excited to be welcoming Meredith Elbaum and Nellie Reid into this forum! Meredith and Nellie were the duo that originally conceived of the Sustainable Design Leaders network back in 2008, and led the effort (with BuildingGreen’s support) through it’s early years. 

They later left their SDL roles, so they haven’t been... Read more

Hi folks,

USGBC has commissioned this survey of the building industry about Federal tax incentives for building efficiency. They will be sharing results with congressional staff, so this might be a good opportunity to give them feedback from the field!

And it's just 10 minutes.

And, after you do the survey if you want to... Read more

Hey, all. Confirming the forum index on the front side of the pay wall will be searchable. Thanks.

Hello, Green Gurus!
It was lovely to see some familiar faces (and names) in this afternoon's webinar about Low Carbon Specs. A little personal info, but I have just recently returned from maternity leave, and plugging back in to this network of passionate sustainability professionals is one of the things that actually made me look forward... Read more

Office furniture’s materials and components can come from unsustainable sources, and use adhesives that emit formaldehyde or other volatile compounds.

BuildingGreen-Approved Furniture

BuildingGreen approves tables, desks, and other office furnishings certified to BIFMA’s multi-attribute level 3 standard, which requires low... Read more

Hi All,

Has anyone successfully adopted a Revit to ClimateStudio workflow with their new export tool? Right now we are using cove.tool because it works reasonably well with iterative Revit modeling, but are itching to try a more accurate and nuanced alternative.

Thanks for any and all experiences!
Misha