In looking for ways to reduce jobsite waste and lower our carbon emissions, I'm working on a business plan for centralized procurement, in lieu of individual project purchasing their own tools, PPE, & consumables.  I'm curious as to how many other GC's on here use (or have used) a central purchasing process and if you have any pros/cons... Read more

Hi Brilliant People: 

I'm hoping you can help me with a quick research question. A local colleague is trying to make the case to replace an existing old slate roof with slate vs. "slate look" asphalt shingles on a local public historic building. The bids are 6X higher for slate over the alternative 25-30 year solutions. They understand... Read more

With the current push for improved window performance to meet energy codes and Passive House, room side low-e coatings can significantly improve window U-values. However, back in 2018 Payette did this excellent study that showed that while room side low-e coatings improved window U-value and increased the interior radiant temperature, the... Read more

Hello,

We are having a discussion / a bit of a debate in our office about the merits and sustainability of different roofing materials. Our current standard is to use a PVC membrane, which we all know is highly toxic. TPO is an obvious alternative that is less toxic, but it has some performance concerns and can often lead to leaking (not... Read more

Hi Everyone,

Who has worked on a SITES certification and can share the approximate hours involved for administering and completing documentation? A relative sense of the effort compared to LEED would also be helpful, similar to the thread about WELL on this same subject. 

Appreciate any insight. Thanks! -Hilary

Hello all,

The Bay Area SCL contingent has recently published an anti-idling toolkit so contractors can get empowered to enact their own anti-idling policy on their jobsites. We're all in this together - if you haven't already brought this up with your company management, hopefully this toolkit serves as a good starting point. 

... Read more

All--

Metropolis magazine asked me to write a long piece about the current state of post-occupancy studies. I'm wrestling with whether to do it and how to approach it, but it would be helpful to hear your thoughts on the following--

--importance of the topic

--typical and atypical approaches and criteria

--examples... Read more

BuildingGreen is the most trusted voice in sustainable design and architecture.

This ad-free, member-supported resource is here to guide designers in using high-performance strategies, and in selecting sustainable and healthy products.

If you haven't already, start by creating your unique user profile to get your log-in, and be... Read more

Hello everyone,

We have a higher ed client in New Jersey that is interested in learning more about the 179D tax credit and would like to speak to someone who can help answer questions and offer guidance. If you have experience that you can offer, or you can provide some contacts - ideally with higher ed experience - who would be willing... Read more

Successfully managing the LEED documentation process requires specific knowledge, tools, and skills that are not covered in the LEED Reference Manual. This CEU course is based on the LEED Project Management course that GreenStep developed and teaches through UC–Berkeley Extension. It is designed for professionals who are somewhat familiar... Read more

Solvents and other hazardous ingredients contained in flooring adhesives can pose a significant health risk and compromise indoor air quality.

BuildingGreen-Approved Flooring Adhesives

BuildingGreen approves flooring adhesives that

Hi Everyone,

HKS is looking for an energy analyst & systems design engineer for our Dallas office. If you know anyone that might be interested and qualified for this position, please send them our way!

https://careers-hksinc.icims.com/jobs/2428/energy-analyst-%26-systems-design-engineer/job

Thanks,

Ellen... Read more

Hello all,

I've been in communication with a few of you already, but for those who don't know me - my name is Jen and I'm a new member of the BuildingGreen team helping out with the Peer Networks. I've already been learning a lot, and I'm looking forward to getting to know the SDL Network and its members better!

Here are the... Read more

Hello, I'm wondering if anyone out in the network has experience with the following:

>Low carbon concete mixes for polished concrete slabs: we're hearing concerns from our concrete supplier that using a low carbon mix design for a polished concrete slab will cause pitting. What experience do others have?

>Low carbon concrete... Read more

Welcome to the quiz portion of What Makes a Product Green?.

Learning Objectives
Upon completing this course, participants will be able to:


1. List and describe at least three attributes that address each of the following categories: "efficient use of materials"; "responsible sourcing"; "energy and water... Read more

Greetings Gurus!

For those who missed it - last year we had a blast enjoying all of the brave souls who shared their awesome talents with us all - what could be better than to start the new year with friends and fun!?!

(See links below for last year's program)

If you are willing to perform again - that's great! (just cause... Read more

Hi everyone,

We’re excited to announce that registration for our Summer 2024 Sustainable Design Leaders Summit is now open! Join us from July 15th-17th at IslandWood on Bainbridge Island, a beloved location where we’ve hosted Summits multiple times before. Register early to save your seat, and feel free to reach out to me with any... Read more