I know that there is a risk of starting a whole flurry of congrats through the forum, but this is a biggie, and deserves some recognition:

Congratulations Andrea and Melanie!! Huzzah!!

And a reminder--If you want to reach out to them privately, rather than through the forum, with your message, you can see anyone's email address by... Read more

Upon completion of this course, participants will be able to:

Be aware of key dates in the history of the LEED rating system.

Have a clear understanding of the new impact areas present in the updated rating system.

Ascertain which types of new credits belong to which impact areas in the LEED v5 rating system.

Medium-density fiberboard (MDF), particleboard, and interior-grade plywood can emit formaldehyde, a known human carcinogen. Some materials  come from non-sustainable sources.

BuildingGreen-Approved Panels

Products meet California Air Resources Board (CARB) ultra-low emitting formaldehyde (ULEF) or no-added-... Read more

Greg Calnago

Hi all, has anyone come across a comprehensive (and recent) study looking at how long buildings actually last (beyond Stewart Brand)? I know of plenty that look at the benefits of reuse, but none that look at existing building stock and how much has been reused vs. demolished. 

As we start looking at embodied carbon metrics, I can't help... Read more

Hi folks,

On today's call James Peterson will be introducing a conversation about how COVID might have changed our ways of working.

If there's time afterwards, we can take a look at this draft article from the USGBC research team. They're interested in our input on how we might want to analyze the info on electrification rates in... Read more

July 29-31, 2020
Chicago, Illinois

Learn more and register

Tuesday, Mar. 17, 11am EDT

Tuesday... Read more

Following up on one of our conversations on the vision vacuum and sustainability beyond certifications, I would like to help facilitate an offline conversation with anyone working within their firm to use the AIA COTE measures as a guiding framework in their firms/projects. Attached are my slides on my first pass at thinking about this at Page... Read more

All,

Can anyone suggest a product for the following situation.  We are looking to insulate existing aluminum eterior column covers that have a three inch air gap.  The issue is there is no way to remove the covers without destroying them.  we would like to cut small holes, pump in the insulation  and then cap the holes.  Can anyone... Read more

Hi everyone,
The city of Portland recently expanded acceptable certifications for affordable housing projects they provide funding for to include Enterprise Green Communities Certification. Other options are LEED (flavor depends on project size) and Earth Advantage Multifamily, which is a regionally owned and operated certification. This... Read more

An elevator system can account for 4%–10% of a building's electric energy load, without considering impacts on heating and cooling. Conventional finishes are also common.

BuildingGreen-Approved Systems

We approve the most efficient tension elevators from leading manufacturers, including models that incorporate:

Looking for the Top 10 on the 10th! webinar?  Click here.

IRA NUTS & BOLTS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

The Inflation Reduction Act (IRA) offers us a once-in-a-generation chance to equitably decarbonize the built... Read more

All,

Some of my colleagues and I have been working to promote interest in mass timber construction for K-12 builidngs.  As part of that effort we redesigned a large high school using mass timber in lieu steel, and conducted a whole building life cycel assessment to measure the reduction in embodied carbon.  We also conducted a program-... Read more

Have any of you relied on Green Badger for LEED documentation on projects?

I am familiar with the tool and know Tommy from my time in Atlanta, but have not used it on a construction project.

Have you found value? Thoughts?

Either way, they publish a pretty nifty "LEED v4 Construction Tool Kit" that may be useful for your... Read more

Hey SDL,

I'm curious if anybody out there has developed specification language requiring a certain level of airtightness (as assessed via one or a series of blower door tests) for a commercial project when it is not going for a Passive House certification and a blower door test is not required by code--basically, something in the... Read more

Friends of EPIC –

Hey, everyone. As some of you might have heard, we’ve been working for a while with Autodesk to get c.scale (the data model behind EPIC) built into Forma – Autodesk’s AI-powered planning tool. Forma is packaged within Autodesk’s AEC collection and most firms using Revit should already have access. This integration is... Read more

Hi folks,

I'm looking into lower-carbon pipe options for HVAC and plumbing. The MEP 2040 has slides from a Buro Happold study in 2020 showing PEX to be much lower in embodied carbon than copper, which is unsurprising. CPVC is also a lower-carbon option.

But PVC has its issues and neither PVC nor PEX are recyclable (especially if... Read more

Good morning all,

I'm new to the forum and I am really happy to be here. For the last year or so, I have been working to advance high performance design at Flad, grappling with so many of the issues discussed in this forum. Especially in the context of recent times, it feels really wonderful to join a group of people dedicated to helping... Read more