Hi folks,

We have a really great webinar set up for Thursday, Oct 25 at 2pm eastern. This one is based on the 5-minute presentation from Heather DeGrella at the Summer Summit--our jaws were on the floor when she presented it there, and we were hungry for more.

Sign up here: https://zoom.us/webinar/register/... Read more

Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

Hi all - 

I have heard a good deal about SBTI in the last while and am wondering about this group’s firms’ engagement with them. We reported one year through CDP, and it was not very useful. It focused entirely on Scope 1 and 2 emissions, which are over 1000x times less than our semi-controllable Scope 3 (buildings’ embodied carbon and... Read more

Hi folks,

A press release about this just showed up--most of what they're including in their "Clean Construction Declaration" involves reducing embodied carbon in materials, but they're also calling out construction equipment:

"Procure and, when possible, use only zero emission construction machinery from 2025 and require zero... Read more

Hello All,
Checking in on experience with Armstrong's Tectum E-N with NEOPOR Graphite polysytrene GPS rigid foam insulation core in roof panels for exposed structure?
BASF says that NEOPOR uses up to 30% less material than other rigid foam; it is greenguard gold cerified. 

Interesting that the NEOPOR increases in R-value as... Read more

Hey Everyone!

We are delighted to share a major milestone in our commitment to sustainable design. After two+ years of intensive research, refining, and internal application, NBBJ is thrilled to announce the external launch of ZeroGuide, an innovative tool for early-phase carbon estimation, now available to the entire AEC community!... Read more

Something we seem to be seeing a lot in our market recently are projects split into multiple packages - footing / foundation, C&S, and then later a TI package of CD's... mostly in an effort to speed up permitting and construction schedules. (Oftentimes with a contractor on board for a design / build approach). 

My question to the... Read more

How much does every designer need to know? How to support that basic literacy?

Guiding Questions:

I have been asked to recommend folks to join the AIA’s Framework for Design Excellence.  The AIA Framework for Design Excellence is basically the top ten toolkit, that has been rebranded by the AIA and is forming the backbone of much of the policy that the AIA is currently setting.

From the AIA's website:

Welcome to the quiz portion of Chemical Transparency: The HPD Issue.

Learning Objectives
Upon completing this course, participants will be able to:


1. Discuss why chemical transparency matters and answer common technical and practical questions regarding HPDs.
2. Offer solutions for the legitimate concerns... Read more

Following my retirement from BuildingGreen, I’m also looking to retire from the nonprofit Resilient Design Institute, which I’ve been leading since 2012. My default plan is to sunset the organization in the fall of 2024, but I wanted to offer the idea of someone (or multiple people) taking over the organization.

RDI is incorporated as a... Read more

We are working on a large healthcare project in Minnesota.  We're setting sustainability goals a bit late - no certification, but targets with accountability.  I'm working to determine recycled steel content (for structural steel and rebar), and I've gotten a bit of push-back on recycled content based on being in the region of the Iron Range... Read more

I've been hearing recommendations for bipolar ionization, as a way to filter airborne virus particles in HVAC systems while avoiding the energy penalty of increased ventilation. However, I've also heard that ionizing equipment is dangerous because it produces ozone.

Does anyone have any insight into the effectiveness and/or cautions... Read more

Returning to work: for many, it’s unthinkable without some kind of reassurance that leadership and the facilities team have taken all possible precautions. Lots of organizations are weighing in on what we should pay attention to, but how do we know if it’s working?

The free Re-entry program from Arc is a tracking and measurement... Read more

Hi Gurus,

We are having a hard time sourcing a baby changing table that is free of anticmicrobial coatings. KoalaKare, the predominate manufacturer, includes Microban in both their plastic and stainless steel product options.  Does anyone have any experience with a durable, ADA compliant and readily available baby changing table free of... Read more

Dear Gurus,

At Greenbuild this year I'll be discussing how statistics can lie (in the context of green building claims).  I'm collecting examples of this to prepare.  If any of you know of examples, please send them to me! 

Here are a few of the fun ways statistics might lie that I would be looking for: biased or too-small sample... Read more

Office furniture’s materials and components can come from unsustainable sources, and use adhesives that emit formaldehyde or other volatile compounds.

BuildingGreen-Approved Furniture

BuildingGreen approves tables, desks, and other office furnishings certified to BIFMA’s multi-attribute level 3 standard, which requires low... Read more