What a great first day!

Here are the slides from the show and tell presentations last night at SOM's office; everyone who presented with slides has given approval to share them.

Zero Tool has an expired certificate and isn't functioning. https://zerotool.org/zerotool/

I've emailed info@architecture2030.org but nothing yet. Anyone have any suggestions for contacting the administrators?

Thanks,

Tiffany Broyles Yost

GBBN

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Glazing is by far the most complex single component of our enclosures and it must be climate-tuned to boot. Getting the amount, the location, and the performance attributes of glazing is key to... Read more

Hi folks,

We have a really great webinar set up for Thursday, Oct 25 at 2pm eastern. This one is based on the 5-minute presentation from Heather DeGrella at the Summer Summit--our jaws were on the floor when she presented it there, and we were hungry for more.

Sign up here: https://zoom.us/webinar/register/... Read more

Erika Heet is the Editor-in-Chief of BuildingGreen. She is the former Editor-in-Chief of Interiors magazine. She has held senior editor positions at Dwell and Architectural Digest, and is the author of two books on modern architecture. She has served on the boards of Greenbuild and the Sustainable Furnishings Council, as well as on juries for... Read more

Greetings AEC Sustainability Leaders -

This is an update on where we stand with the BBB letter. In addition to posting this to the AEC SDL (Green Gurus) Forum, we are sending the same message to all current signatories by email to make sure everyone is notified. Apologies for putting two items in your inboxes!

First, please read... Read more

SAVE THE DATE: ALL Peer Networks Show & Tell
Tuesday, November 19 | 8pm - 10pm
The Kendeda Building, Georgia Tech | Atlanta, GA

Start your time at Greenbuild on a high note!

Join your Peer Networks Colleagues from SDL, SCL, MEP, SDLS, and SAL for a high energy evening full of lightning round previews of the best... Read more

This summit was pre-approved for 3.5 AIA LUs and 3.5 GBCI CE hours.

Please complete the survey questions to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to the organization. Please check your profile to be sure your... Read more

Hi all,

We recently learned that Mass Dept of Environmental Protection (MassDEP) along with a few other state agencies are looking to offer grants for wastewater heat recovery implemented into projects. This is a newer technology that puts a heat exchanger or heat pump in the wastewater system that then extracts the heat energy and... Read more

If your HVAC designers are addicted to the crack that is Trace 700, and knowing that Trane is giving up on that product in the coming year, what loads program are you weaning* them onto?

Asking for a friend:  Have any of you had success in using the Revit plug-in for loads?

*When told that they should use IESVE for loads, our HVAC... Read more

Commonly used for interior partitioning of commercial buildings, light-gauge steel framing is increasingly being used in residential construction. Compared to solid wood, steel studs are lightweight, dimensionally stable, resistant to insect damage, and of consistent quality. 

BuildingGreen-Approved Structural Steel

Products... Read more

He just posted the following on the Building Performance Knowledge Community forum:

Does anyone have a recommendation for software that is easy to use and relatively inexpensive for doing energy performance analysis at the schematic design (or before) phase?  We are looking for a tool that gives good quantitative comparisons for... Read more

Do any of you have experience with Design For Freedom yet? It came to my attention and I'm trying to investigate. I would love to hear feedback and experiences that you may have at this point. It seems like an opportune moment for this issue of forced labor (yikes! so much I don't know...) to come to the forefront, and I'm curious to hear how... Read more

Thank you for joining us for this webcast! Please complete the following survey to provide us with feedback and to record the information we need to report your CEUs.

By providing the information in this survey you will enable us to automatically report these CEUs to the appropriate organizations. Everyone attending and seeking CEUs must... Read more

Folks,

In case any of you enjoy the Phoenix weather, I wanted you to be sure to know that our company, Sundt, which is headquartered here is looking for a sustainability director to lead up our efforts. This comes after two years of work and hiring a consultant (Brightworks out of California) to help us prepare and take the next steps. I... Read more

Hey team,

I'll go look to see who's in the MEP group, but does anyone in this circle have a northern California design engineer for institutional work that they'd particularly recommend? A group of folks we're engaged with is apparently having difficulty identifying a California-based MEP that everyone universally likes for high-... Read more

We just heard from one of our more progressive clients that they are pulling Mohawk from their shelves and are no longer allowing it on their projects. Apparently there are some chemical ingredients they objected to, but more importantly the manufacturer "lied" to the client about the content. Does anyone have an idea what this might be about?... Read more