I'm looking to change consultants. Let me know if you have worked with a 179D consultant that you would recommend.

I took a first pass at content for the Energy Audit best practice, see the uploaded file. 

Hi all,

As discussed in our monthly meetings, we are assembling an industry push to expand the availability of embodied carbon data for MEP equipment. Our first steps are to send a letter to industry announcing a call to action and future educational webinars on the topic. In a similar manner as the electrification letter by the SMEP... Read more

Wood decking requires potentially hazardous preservatives and stains, and plastic waste is a significant environmental problem.

BuildingGreen-Approved Decking

Composite decking approved by BuildingGreen has at least 50% total recycled content. For plastic decking, post-consumer content has to be greater than 50%.

Health and... Read more

Welcome to the quiz portion of What You Need to Know About Concrete and Green Building.

Learning Objectives
Upon completing this course, participants will be able to:


1. Recognize concrete's environmental footprint and how to reduce the quantity of concrete used in buildings.
2. List the advantages and... Read more

Hello All,

A group of us (three architects and a builder- sounds like there should be a joke here) were debating this and we  are stumped.

Application: Residential exterior trim.

50 year warrantied composite product of agricultural byproduct with PVC (EPD not published yet) vs 100 year (if primed on all sides and painted or... Read more

Hello,

We're trying to budget Fitwel Certification consulting fees for a non-profit client for whom we're designing an early childcare center in Louisville, KY. It would be for a single tenant new building Fitwel certification and include a Fitwel introduction workshop, working with design team, and coordinating/submitting documentation... Read more

As many of you already know, Hanson Wade is starting a NEW conference this year on Advancing Construction Decarbonization. It is being held in-person July 19-21 in Denver, CO and looks to be a great program. 

The organizer of the conference contacted us to see if more SCL members might want to be speakers--so if you're interested in... Read more

All--

Metropolis magazine asked me to write a long piece about the current state of post-occupancy studies. I'm wrestling with whether to do it and how to approach it, but it would be helpful to hear your thoughts on the following--

--importance of the topic

--typical and atypical approaches and criteria

--examples... Read more

Does anyone have an experience on recycling/reusing architectural glazing? We have a sizable glazing replacement project, and I am realizing how difficult it is to find a way to prevent the glazing from going into the landfill. So far, I have reached out to Terrazzo (aggregate) manufacturers, Glass Recycling Coalition, Architectural Glass... Read more

Greetings Gurus, following the AIA COTE Design for Economy concept, does anyone have a resource for a list of building efficiency ratio "targets" by space type? I've always struggled with this initiative. 

This might be going down a rabbit hole, but in moving to California this year I noticed that "zero net energy" (ZNE) is the standard term, whereas "net zero energy" (NZE) was more common back east. The DOE's 2015 definition (below) uses "zero energy building" (ZEB), which to me implies a building uses no energy at all.

Regional... Read more

Welcome to the quiz portion of Wood: What’s Good?

Learning Objectives
Upon completing this course, participants will be able to:


Hi all,

We are about to start a affordable housing passive house project in Boston and in a few presentations I've seen great signs that builders use to try to get the point across to subs as to how important air sealing is. Some are even quite funny! The builder we are working with does not have a sign like this, but is open to ideas.... Read more