BuildingGreen Report

Team Group

Forum topic

With the increasing need to support design with techncial expertise, I am curious to hear how others are meeting this challenge.  Do you build energy models in-house?  Do you have a team of experts whose sole responsibility is to support design teams with tasks such as energy modeling and LCA, or is that expertise distributed throughout the... Read more

Forum topic

Hello, what acceptable levels of air quality are you using to evaluate natural ventilation strategies for your projects?  In our Living Building we only open windows when PM10, PM2.5, etc. are within LBC and WELL limits.  In a seasonally smoggy urban environment, this limits how often we can utilize natural ventilation even if the outside... Read more

Forum topic

Hi all, 

I'm looking for critical mass here. Do any of you have or know of clients who are requiring Just labeling for their consultants? I've heard that Google is asking this, and wondering who else might be on that course. Thanks! 

Forum topic

Curious on stories when IAQ testing for LEED or WELL didn't come back with "all clear, everything's good" results we all hope for. 

I have a project right now where we are tracking down suspicious sources and look forward to telling the full story when it's done being written. 

Thought maybe this would be a good safe space to talk... Read more

Forum topic

Hi All, wanted to share this webinar below :
The AIA 2030 Commitment and the Design Data Exchange (DDx) have transformed the way architecture firms collect project data on energy and carbon metrics, but it has never been a good place to visually understand these metrics. Architects tend to be visual people and have an intuitive... Read more

Forum topic

As announced in last week's SDL/SCL Winter Summit, I have been working with a group of regional AEC professionals, industry stakeholders, and the New Buildings Institute on two code proposals to the 2021 Seattle Building Code that limit the Global Warming Potential (GWP) of concrete & steel in buildings over 50,000 sf (see attached).  We ... Read more

Forum topic

This might be going down a rabbit hole, but in moving to California this year I noticed that "zero net energy" (ZNE) is the standard term, whereas "net zero energy" (NZE) was more common back east. The DOE's 2015 definition (below) uses "zero energy building" (ZEB), which to me implies a building uses no energy at all.

Regional... Read more

Forum topic

Has anyone here found an alternative to XPS for the void former?

A structural engineering contact was included in recent conversations about embodied carbon in insulation materials and brought to our attention that this is a common use for XPS that has nothing to do with its insulating properties. It is typically used where concrete is... Read more

Quiz

Welcome to the quiz portion of Measuring Energy Use in Buildings: Do Our Metrics Really Add Up?.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Explain the differences between site energy, source energy, and energy cost.
2. Summarize three ways in which source energy can... Read more

Forum topic

Hi Sages,

As you may have seen in my message, the Peer Networks Member List is not very helpful to us (yet), because a person can only show up in one network. Many of us are also in SDL or other networks; there are many more of us than show up when you filter that list for "Sages."

Until we can get that fixed, we'll share the... Read more

Forum topic

BITuser Meeting:  5/23/18

Participants:  Shane, Andrea, Angela

Notes:

Southface to provide "style tiles" before 6/15 
Greg to send to Andrea, couple dozen images for Best Practice pages
Southface will send, in week to 10 days, "full content" for BP03 - Energy Audit 
(BP03 "full content" will address... Read more

Product Guide

Exterior doors often have poor insulation and seals that allow air through.

BuildingGreen-Approved Exterior Doors

BuildingGreen has different criteria for commercial and residential exterior doors.

Commercial swing (hinged) doors must be NFRC-rated, certified, and labeled for U-factor. They have a maximum air leakage of 0.... Read more

Forum topic

For any of you who are already tracking your Scope 1, 2 & 3 emissions: Do you do so through a program (like the Carbon Disclosure Project) or do you have an in house excel file or ???? I'm looking for a good template and am open to suggestions.  Looking for what you like and what you find challenging.  Thank you.

Author

Quiz

This pre-summit workshop was pre-approved for 5 AIA LUs and 5 GBCI CE hours.

Please complete the survey question to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to the organization. Please check your profile to be sure... Read more

Forum topic

Does anyone know of a good summary of state and local energy code adoption for new building and ordinances for existing buildings? I know of this energycodes.gov site, but it feels somewhat misleading when you dig into it. For example, in CO, it suggests there is no min code, but there is, and it doesn’t show the extent to which local govs are... Read more

Forum topic

Hi, curious if anyone in the group has considered using Fitwel in an existing (built) school project (K-12). 

Would be interested in hearing your experiences and if this tool is a good fit for this type of project.

Forum topic

Hello all,

I've been in communication with a few of you already, but for those who don't know me - my name is Jen and I'm a new member of the BuildingGreen team helping out with the Peer Networks. I've already been learning a lot, and I'm looking forward to getting to know the SDL Network and its members better!

Here are the... Read more