On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Hi Everyone - I hope this isn't a repeat topic. We are starting to get familiar with TallyCAT at SAR+ and have a few people testing our projects in it. Is anyone willing to help us troubleshoot or share lessons learned? We're running into a few errors and wonder if our Revit models and workflow are the issue, or if we need to be doing something... Read more

I was wondering if any of you have experience with integrated PVs and/or solar glass. If so, can you could recommend manufactures for each? We are working on a multistory freestanding building in an urban site for a mid-Atlantic city. Because our site and roof area are limited we are looking to maximized the areas where we can generate power.... Read more

We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

Welcome to this practice session for the LEED AP v4 exam, and good luck!

All the exam questions and explanations that follow were authored by Alex Spilger, LEED AP BD+C of GreenStep Education, and are provided in this BuildingGreen "exam simulator" through a special partnership with GreenStep and with our friends at the Poplar Network.... Read more

We had these conversations grouped by size of firm. 

Guiding Questions:

Knowledge Management By Firm Size

How to give people the info they need, when they need it?

Is the COTE Top Ten a good framework?

This seems extremely daunting in a large firm. How do we manage content that is produced and shared... Read more

Hey all,

We have a NAVFAC project going into construction that has indicated that they'd like to hire someone to help them with the construction tracking aspects of the UFC requirements, including the Guiding Principles Assessment (GPA) program through GBCI. We're on the design side, so cannot offer these services on our own project;... Read more

hi all! I'm almost at the finish line with this year's 2030 reporting...whew. I'm running into an issue that I wanted to throw out to this group, regarding the zero tool and national average baselines. Hoping some of y'all who manage your firm's 2030 data, or are just more familiar with CBECS and related data, have some insight / experience to... Read more

Hello Green Gurus,

Now is a pivotal moment. Net Zero Stretch Code legislation has been proposed in the Massachusetts House and Senate, and draft code language is currently being developed by the Board of Building Regulations and Standards (BBRS). The Net Zero Stretch Code is currently the greatest single opportunity to support reduced... Read more

***Cross-posting this from SCL Group***

Last year I was approached by Green Advantage, remember them from like 2005? There has been a LEED innovation credit for as long as I can remember.

Has anyone seen employed Green Advantage recently? Is anyone asking for it?

Do you see value in GCs/CMs/trades having this training... Read more

Hello Gurus,

I have a client (bldg owner) who has asked me to recommend a list of firms who have the internalized resilient design in their practice.

They are *not* asking for resiliency consultants right now, but for firms that they might hire for "regular" capital projects, but since resiliency is high on their priorities, they... Read more

Hi all - I’m wondering if any of you have heard of or use the National Green Building Standard, which appears to be primarily for residential and mixed use: https://www.homeinnovation.com/green.

The NGBS Green certification program is based on the ICC-700 National Green Building Standard and supposedly is the program of choice for many... Read more

Congrats Nadav!!!! https://www.aia.org/showcases/181011-nadav-malin-hon-aia?utm_source=Buil...

Plastic windows come in both ABS and vinyl (PVC). Even though PVC is particularly loathed by environmentalists, energy performance is BuildingGreen's primary green consideration for windows, and some vinyl windows offer exceptionally strong energy performance, often with competitive pricing.

BuildingGreen-Approved Plastic Windows

... Read more

Auto-quiz used for CEUs for attendees of the 2023 SDL Winter Summit.

We have another great class of COTE Top Ten winners—congratulations to all of you with recognized projects. Join us on May 10 at 2:00 pm Eastern time for an inside peak at many of this year’s winners, along with insights from jurors. CLICK HERE TO REGISTER.

To keep things open and honest we won’t be recording this session. This “safe... Read more

Jill is a licensed architect with WELL and Living Future accreditation. Through her experience leading sustainable achievement and verification on projects in the workplace, K-12, civic, and retail/mixed use typologies, Jill brings her passion for sustainable materials across vetting categories, AEC disciplines, bid scenarios, and market... Read more