see IFTF- A New Story to Spark the Future of Climate Action

and chek out their Climate Action Map download

Hi, we need 3-4 folks to volunteer to join us to work out a draft Materials section for the Contractors Commitment.  Meeting set for 6/16 @ 2 PM CST.

Please message me at pslloyd@leopardo.com if interested in participating.  I will forward out the meeting invite. If the time doesn't work, but you want to participate, I will share info in... Read more

This webinar occurred Thursday, December 15.

Attendance confirmation closed Friday, December 30.

Whether it’s the flooding in Pakistan, the devastation caused by Hurricane Ian in Florida, or the record-breaking wildfire season in Europe, climate change is in the news daily. Just as there’s an urgent need to reduce... Read more

Hi, all.

Has anyone used Unicel's Timber Curtain Wall System? It uses engineered glulam wood mullions on the inside with aluminum mullion caps / butt joints. Has anyone gotten close to using it, but couldn't get it procured for a particular reason? They note up to 72% more energy efficienct than a conventional aluminum curtain wall and... Read more

Has anyone had any success with achieving the LEED Building Envelope commissioning points with an alternative compliance path using the requirements of the PHIUS verifier? It seems like an unnecessary duplication to ask the client to pay for a BECx agent and a Passive House verifier. Or am I missing something? I can't find any LEED... Read more

Hello SDL-ers - 

The SDL Climate-Smart Wood Group hosts a monthly online forum for builders all over North America who care about wood - and if that sounds like you, you're invited! As builders, we want to advocate for the conscientious use of wood as part of a holistic commitment to climate justice and resilience. We have been meeting... Read more

Welcome to the quiz portion of Can We Replace Foam Insulation?

Learning Objectives
Upon completing this course, participants will be able to:


1. List four ways in which foam is environmentally problematic and provide four examples of foam replacements.
2. Discuss the industry's relationship with foam... Read more

I'm sure may are familiar with Aqua in Chicago, and Joe Lstiburek's article on thermal bridging. (https://buildingscience.com/documents/insights/bsi062-thermal-bridges-redux) We have similar problem with a project that is a residential highrise building, concrete structure. Here is my questions. Will energy simulation be able to pick up the... Read more

Are any of you working on projects that are pursuing the additional point for Indoor Water Use Reduction on a HC project via Table 4 Compliant laboratory and medical equipment? If so, what sterilizers are the projects using?

We are receiving pushback that the Sterilizer metric doesn't make sense. I am interested in any insight or a... Read more

Hi, curious if anyone in the group has considered using Fitwel in an existing (built) school project (K-12). 

Would be interested in hearing your experiences and if this tool is a good fit for this type of project.

There are so many great contractor-related sessions at Greenbuild this year! I doubt I'm alone in trying to choose between sessions.  

Is there interest in debriefing with SCLers the week after (say Novemeber 9th at 2pm ET?). We could share the golden nuggets from the sessions we attended, saving everyone from wading through the session... Read more

Hello Green Gurus,

Here is an exciting event we're planning for the end of the month!

Innovative Projects Showcase - “The Power of Collaboration”

A selection of your fellow sustainability leaders will showcase a few recent projects that exemplify integrative process and cross-disciplinary collaboration. Each presentation... Read more

We have a project that is looking for plaster/stucco/textured wall products that are sustainable, or “more sustainable.”

I know these products exist, but I haven’t had to spec or work with any, so I’m reaching out.

The project is in MA, so I'm also soliciting recommendations for products and/or companies who are experienced using... Read more

I received the following email from Naajia at Southface.  I'll be out of town until November 8, but I'll see if there's time for me to address at least the second part before I leave:

A question regarding the BIT-User Forum was brought to my attention by a participant. Apparently when you are posting a question and you pick your location... Read more

Sign up now to roll up your sleeves and have fun solving real problems! April 28 from 3-5pm ET

DESIGNING FOR DECONSTRUCTION

Building deconstruction, or disassembly, is a critical strategy for carbon reduction, minimizing waste & contributing to a circular economy, yet remains a serious challenge for many reasons.

Many... Read more