Forum topic
Colleagues,
As we all know, ventilation rates must be kept the same between the LEED Baseline and proposed energy models. However, we're aware of projects that have been able to claim energy savings associated to reducing ventilation using systems like Aircuity.
Have any of you successfully claimed credit for reduced airflow due... Read more
Forum topic
Hi. Happy Monday! Will BG create the BIT-user intro video found on the landing page? Do we partner on it, or should Southface plan to provide it? Thanks.
Product Guide
Metal windows are used in commercial building because of their durability, low maintenance, and ability to handle wind loads.
BuildingGreen-Approved Windows
Metal windows must achieve an NFRC-certified unit U-factor of 0.20 or lower to be approved by BuildingGreen.
Manufacturers also must demonstrate that their highest-... Read more
Forum topic
Please use this thread for you're actions / ideas for creating more sustainable job site construction office trailers.
I know that Pepper Construction led the way with a Net Zero Construction Jobsite Trailer. (Thanks Susan Heinking!) Is this a one off? Any lessons learned? Any one else pursing this? Is pepper the first and only doing... Read more
Forum topic
As we begin to look into Scope 3 emissions reduction strategies, it's important to understand ways to reduce tranportation emissions to project sites. Is anyone aware of best practices or programs for contractor carpooling to jobsites? I know many of my colleagues travel to work together in one vehicle because of parking limitations, however,... Read more
Author
Kelly provides administrative support to BuildingGreen projects, including major contracts as well as event planning, and logistics coordination for BuildingGreen’s network of sustainable design leaders. Among her projects, Kelly coordinated a large tri-state regional economic development project focused on the green goods and services industry... Read more
Forum topic
Hi there Hive Mind! Hope everyone's doing well and staying cool in the heatwave all over.
An engineer on one of my projects reached out about contact switches for operable windows that are empowered to shut down the associated FCU in dormitory bedrooms when the window is open. This functionality allows the FCU to run at something like... Read more
Reports, Courses, Study Guides, Live Webinars
THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.
Tue, Oct 9th, 2018 2:00 PM - 3:00 PM EDT (11:00 AM - 12:00 PM PT)Glazing is by far the most complex single component of our enclosures and it must be climate-tuned to boot. Getting the amount, the location, and the performance attributes of glazing is key to... Read more
Forum topic
Hi all, we are embarking on an effort to standardize our LCA process in order to maintain a firmwide database of embodied carbon intensity from which we can create internal baselines and targets. I was wondering how other offices are setting boundaries for their LCA efforts. Below is our starting point. Most LCA will be conducted using Tally.... Read more
Forum topic
Curious if folks know of any resources on hempcrete, specific to durability. We have a one-story carbon-neutral operational energy project where the design team and client have bought into the aesthetics and carbon-sequestering potential of hempcrete, and amazingly it is looking to be no more expensive than a more typical concrete wall... Read more
Forum topic
It was great to see everyone who was able to join in the peer networks webinar and to be able to share a brief update on what the Defining and Measuring Resilient Outcomes working group has accomplished over the last year... and what we are looking forward to tackling in the coming year.
I've both attached a copy of the deck here and... Read more
Quiz
Welcome to the quiz portion of Full-Blown Energy Modeling.
Learning Objectives
Upon completing this course, participants will be able to:
1. Explain the role of the energy modeler and how each energy model opens an informed discussion between the entire project team about the interactions between architectural and... Read more
Forum topic
Dear SDL: I'm writing to urge you to promote project submittals in your firm and region to the 2018 AIA COTE Top Ten (TT) Award. The submittal deadline is 5PM EST January 17, 2018 - coming right up! The TT awards are one of the most recognized design awards for the general public and receive wide circulation through mainstream media. AIA... Read more
Basic page
Thank you for your interest in BuildingGreen
You will hear back from our customer support team in the next 24-48 hours.
Continue to home page »
Forum topic
For those of you working in jurisdictions with both prescriptive and performance-based commercial energy code pathways, roughly what percentage of your projects are using the performance pathway? How do your project teams decide which pathway to follow?
In Minnesota we are seeing very few projects pursuing the performance pathway,... Read more
Forum topic
I took a first pass at content for the Energy Audit best practice, see the uploaded file.
Forum topic
Hi all,
As discussed in our monthly meetings, we are assembling an industry push to expand the availability of embodied carbon data for MEP equipment. Our first steps are to send a letter to industry announcing a call to action and future educational webinars on the topic. In a similar manner as the electrification letter by the SMEP... Read more
Forum topic
This month on our Sustainable MEP Leaders call we were asked what resources would be suggested for advancing integrative design.
Two books immediately came to mind for me:
How Building Learn, by Stewart Brand
https://en.wikipedia.org/wiki/How_Buildings_Learn
It was many years ago but reading Stewart Brand’s How... Read more