Hello,

We’re looking for Design Energy Code Equivalents for Chinese commercial energy codes. Do any of you have  any good sources? I’ve only found data comparing ASHRAE 90.1 2013 to the Chinese Code at that time. We understand the Chinese code require a 65-75% energy savings over the baseline but don’t have good information for defining... Read more

Show & Tell Breakout: share what’s working and what isn’t! Which tools are your favorites? Have you developed any innovative applications? Discovered new pitfalls?

Presentations:

Hi all!

I've heard several people talk about developing tools for assessing/codifying a client's values for a project as part of an integrated design process (ie. a set of questions, survey, etc.). Would anyone be willing to share?

(Z, are you listening? I specifically recall you mentioning a tool like this...)

Thanks!... Read more

Faucets with high flow rates waste water—not to mention the energy used to treat and deliver it to our buildings—and the additional water stresses our wastewater treatment systems.

Hi all,

We've had a number of clients in the states surrounding Texas that have been hit with really high natural gas bills for February. Some as high as $2.00+/therm. Many are healthcare facilities.  Has anyone seen any federal, state, or utility relief programs that are assisting customers with these bills?

Thanks, 

Adam... Read more

We are pursuing sustainability goals (and documentation of those goals) outside of any certification/rating system for a current project.  However, we have set up a criteria list of goals by following strategies/credits from many of those systems (LEED v4 EPDs, SITES v2 threatened tree species, WELL v2 mindful eating, etc.).  This approach is... Read more

Good evening,

I am looking for suggestions to replace"wood" siding at the 25-year-old Lyle Center for Regenerative Studies and as always there is no solution that does it all. There seem to be three main options: wood, composition siding, or fiber cement siding. I am looking for something with low embodied carbon, little maintenance,... Read more

Hello everyone,

Over the past couple of years the Climate Smart Wood Group has met monthly to discuss all things related to the use of timber in building design and construction.  From forestry practices, to supply chain and sourcing information, to design experiences and examples, the group has operated as an open forum for advancing... Read more

The construction sector’s take-make-waste approach to materials needs an overhaul. Materials and construction account for an estimated 11% of global greenhouse gas emissions annually. At the other end of the life cycle, demolition in the United States annually generates 90% of some 600 million tons of construction-sector debris. Getting trashed... Read more

Dear all,

For a specific existing building application, we are looking for a half inch insulating glazing unit, preferably with low-e coating. Based on my research, 5/8" seems to be doable (1/8" glass + 3/8" air gap + 1/8" glass) but I'm yet to find a viable 1/2" solution. Have you come across any on your projects? Thanks for your... Read more

Hello!

I'm curious what other firms like to use to run site-specific sun path and wind path analysises that is relatively intuitive to use and generates good graphics. We have used the climate consultant software for wind roses which is free and simple. We've also used sefaira but we're hoping to crowd source more resources. We purchased... Read more

Not to distract from Tanya's post, but we too have a new opening for a Sustainability Specialist in our Dallas office. If you know anyone...https://careers-pagethink.icims.com/jobs/1254/sustainability-specialist/job

Friends,

We put a lot of effort into air tightness design, detailing, and construction administration, often including 6-sided mockup and parital or whole-building blower-door testing.  For commercial buildings, these tests measure air leakage in cfm/sf at 1.57 psf (75pa).  

I came across this research paper several years ago, but... Read more

Hello, 

Does anyone have experience with USGBC's Green Training Pilot Credit, and/or use of an innovation credit for subcontractor training? I was going to propose training to our subs on becoming an EnviroStars Businesses (WA Green Business Program) and also tie in the Sustainable Contractor's Commitment/project goals.

Since... Read more

Welcome to the quiz portion of Video: Insights to Success on LEED-CI Certification.

Learning Objectives
Upon completing this course, participants will be able to:


1. Identify key changes to LEED CI 2009 (ID+C).
2. Identify the circumstances of a LEED-CI project that challenge the abilityto certify.
3.... Read more

Hi MEP Leaders,

Just a reminder that our monthly meeting is next Tuesday, May 9th, at 2:00pm ET. All SMEPL network members are invited to join!

You can view the agenda here, and the Zoom info is below.

Join Zoom Meeting
https://us02web.zoom.us/j/83598691786?pwd=MjI2S01yZUJRSG4zcXRBNWtPbE5RZz09

Meeting ID: 835... Read more

Hello,

The Baltimore office for Hord Coplan Macht is looking to hire a Sustainability Coordinator.  Please find the specifics here https://workforcenow.adp.com/jobs/apply/posting.html?client=hcm2&jobId=4... or attached and pass along if you know of someone who may be a good fit.

Thank you,

Ara Massey