Hi folks,

It was fun going back over all the great conversations we had and pulling them together in this report. Please feel free to share it with anyone--no constraints on that!

Also, we'll have a webinar next Friday based on this report-- March 8 at 2pm eastern:

I'll show the report and share key takeaways from the 12th... Read more

As with most office furniture, systems furniture can be made from unsustainable materials and use adhesives and finishes that emit formaldehyde or other hazardous compounds.

BuildingGreen-Approved Furniture

BuildingGreen approves furnishings that:

Hello all, 

Wondering if anyone has experience with lead limits in electrical cable and wiring? 

LEED for Healthcare allows a limit of 300 ppm of lead in electrical wire and cabling - my search for compliant products has been all dead ends. (MRc PBT Source Reduction - lead, cadmium, and copper)

Acceptable regulations for... Read more

Hi all,

I'm curious if anyone has insight as to the "New Federal Building Performance Standards" that were announced in May of 2021 and then referenced again when E.O. 14057 came out. The memorandum for heads of agencies that was sent out with E.O. 14057 said that the CEQ would issue these standards, but I can't find a commitment to when... Read more

asdfasdf

ICYMI, this washington post piece reminded me of our summit conversation last Friday about architecture's/SDL's role in reimagining the world post-covid through innovating our practice. 

The article contains some compelling quotes from several visionary architects (fascinated that it's mostly big-A architects, largely bypassing input... Read more

Hello everyone - 

I'm writing today to let you all know that as of this month, I am retiring from SERA, and that I'm going to be beginning a new journey as a consultant/volunteer!

I'm going to continue dedicating my time to policy and advocacy work (focused on decarbonizing the built environment) but now I'll be doing it as a free... Read more

Have any of you heard of anyone ever using phase change material (PCM) "movable partitions" as a resiliency strategy to mitigate indoor overheating during a heat wave in passive buildings? You'd keep them stored in a basement or cool room, and deploy them into habitable spaces during the heat wave to keep the space cooler than the exterior... Read more

Friends,

We put a lot of effort into air tightness design, detailing, and construction administration, often including 6-sided mockup and parital or whole-building blower-door testing.  For commercial buildings, these tests measure air leakage in cfm/sf at 1.57 psf (75pa).  

I came across this research paper several years ago, but... Read more

Dear Colleagues:

This is a request from AIA COTE Advocacy to sign another petition on behalf of your firm. I know it's incomprehensible that we have to do this, but we at AIA COTE Advocacy think the US Federal Emergency Management Agency's removal of the term "climate change" from all their strategic planning documents is evidence of an... Read more

Hello fellow sustainable design leaders! I am about to kick off an intensive effort here at EHDD to refine our internal standards for materials. We will be considering both GWP as well as the health of materials (avoiding harmful chemicals). In addition to setting the standards, I will be working to develop a process to vet materials before... Read more

Welcome to the quiz portion of VOCs: Still Here, Still Making Us Sick!

Important: This quiz covers all related articles within this topic. Scroll to the bottom of the article page to find links to all the articles covered by this quiz.

Learning Objectives
Upon completing this course, participants will be able to:


1.... Read more

Kristen Fritsch, in the thread about ipe wood, asked about resources comparing the carbon footprint of transporting building materials vs the transport mode.  There are people who spend their lives on this topic that I won't presume to speak for, but I'll share a few observations:

Even though freight transport is something like 7% of... Read more

Hi all,

As you know, the Carbon Leadership Forum has been busy in recent years growing the tent of discipline-based commitments for reducing embodied carbon. SE 2050 and MEP 2040 provide the platform and commitment for structural and MEP respectively, and there is now interest brewing for an additional commitment in support of civil... Read more

Dear all,

For a specific existing building application, we are looking for a half inch insulating glazing unit, preferably with low-e coating. Based on my research, 5/8" seems to be doable (1/8" glass + 3/8" air gap + 1/8" glass) but I'm yet to find a viable 1/2" solution. Have you come across any on your projects? Thanks for your... Read more

Peter Yost (at https://building-wright.com/ )  is available to provide building science expertise, trainings, public speaking, building investigations, and more. Learn more