Hi Green Gurus,

In this stressful time, I think it is important for us to continue to feel connected and supported.  Also, it is difficult to come to terms with the reality of what is happening.  So, I thought it would be helpful for us to share some information about the response of our respective firms to the Coronavirus.

The... Read more

So our last webinar effort flamed out with the overloaded internet, but we've regrouped and have the session scheduled for this Thursday 4/2 at 1:10.  We pre-recorded the webinar to make sure everything goes smoothly and I have to say that Mike is delivering some pretty fantastic content. It doesn't engage LCA tools, rather focusing on core... Read more

Hi SDL!

Our CM recently offered up the possibility of substituting Pozzotive into our structural and paving concrete mix (www.pozzotive.com) on a large public building. Apparently it is on a level with the cost of standard cement.
We are eager to reduce the project's embodied carbon, and this seems almost too good to be true.

Hi folks! I had a blast at the Show + Tell Tuesday night of Greenbuild. Thanks to Payette for hosting, and to Arrowstreet for joining Payette and BuildingGreen as sponsors. What a great way to get a "tasting-menu" Greenbuild experience!

I also caught a couple of great sessions on Friday morning. Polling others, it seems that the... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Glazing is by far the most complex single component of our enclosures and it must be climate-tuned to boot. Getting the amount, the location, and the performance attributes of glazing is key to... Read more

Metal windows are used in commercial building because of their durability, low maintenance, and ability to handle wind loads.

BuildingGreen-Approved Windows

Metal windows must achieve an NFRC-certified unit U-factor of 0.20 or lower to be approved by BuildingGreen.

Manufacturers also must demonstrate that their highest-... Read more

Hello Green Gurus!

Quick introduction as this is my first time posting - Louis Koehl, AIA, CPHD, Director of Sustainable Design at Handel Architects, based in NY. I recently joined the SDL Forum and met some of you at the regional summit and Greenbuild.  I'm excited to continue to connect with such an influential group! 

My... Read more

Welcome to the quiz portion of Is Wood Construction Green? A Look at the Issues.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Determine what distinguishes wood products sourced from Forest Stewardship Council-certified forests, and why these products improve the environmental impact of... Read more

Welcome to 2030 reporting season!

I brought up on the Fika today that there is a webinar December 5th to show updates to the DDx including the calculation of operational carbon from your energy data.  Below is a link to register.

https://aia.zoom.us/meeting/register/tZUocOutrTItHtWiySNMIqfGYv4ZbAhtjSg...

Phase one of the website will not include e-commerce (i.e. paid membership) but the BIT team wants to restrict access to some parts of the site, including the full Best Practices documents and the forum. This means we'll need a rudimentary paywall, directing users to register for full access.  Current registered users of BuildingGreen and... Read more

Thank you for your interest in BuildingGreen

You will hear back from our customer support team in the next 24-48 hours.

Continue to home page »

Welcome to the quiz portion of LEDs: The Future is Here.

Learning Objectives
Upon completing this course, participants will be able to:


1. Restate the energy efficiency and long service life of LEDs.
2. Describe basic LED components and how, when assembled, they perform differently than traditional light... Read more

Hi, curious if anyone in the group has considered using Fitwel in an existing (built) school project (K-12). 

Would be interested in hearing your experiences and if this tool is a good fit for this type of project.

Hi GGs,

We are looking to do a renovation of a very leaky old office space, and we want to get a good snapshot of air quality and effective envelope R values both before and after.

Does anyone have experience with:

1. installing heat flux sensors on windows and walls

2. deploying IAQ measurement devices that can log... Read more

Hi All- I will be starting bi-weekly mtg for the PFAS working group to align on our goals as consicous firms and finalize our message aka 'letter to manufacturers' for reducing PFAS in building materials. Please email me (pgupta-garg@wrnsstudio.com) to let me know if you are interested in being a part of the group. First mtg will be next week... Read more

Hello!

Here's a reminder that our call for this month will be taking place next Tuesday, January 14th at 2:00pm ET.

We hope you'll be able to join us on the call!

Join Zoom Meeting:

https://zoom.us/j/248664490

One tap mobile
+16699006833,,248664490# US (San Jose)
+19292056099,,248664490# US (New... Read more

Team,

You probably know on July 9th, WHO issued a document and agreed aerosol route of COVID-19 transmission is possible, but fell short of saying we need to make provisions in our buildings for it per the "Do no harm" principle.  Mary Ann Lazarus, Pauline Souza, Kay Sargent, Joyce Lee, and I (SDL members from architecture and... Read more