Hi All:  We are in the design phase for a 5,700 SF project in NH. The team is taking care to drive down embodied carbon where possible. It will be NZE.

A1-A3 emissions are coming in at 67.15 kgCO2e/sf, of which 11.97 kgCO2e/sf is a hot spot attributed to permeable paving and concrete pavers (a little skewed, since lot and patio sizes... Read more

Hi folks,

Here's the next Peer Networks private webinar. As usual, it will be recorded and shared in the network if you can't make it in person:

Thursday, July 18, 2pm EDT (11am PDT)

The Center for Active Design (CfAD), operator of the Fitwel Certification System, recently launched Fitwel v2.1, which advances a vision where... Read more

Though BuildingGreen has long supported the use of electric hand dryers as a more environmentally friendly hand drying option, the majority of evidence appears to support paper towels as a preferred method of controlling the spread of potential pathogens. 

And even the most efficient hand dryers contribute significant CO2 to the... Read more

Hello Sustainability Leaders,

Our next First Friday Fika* is tomorrow -- Friday, September 1st at 11am ET (8am PT). We'll meet on Zoom for some lightly structured coffee-chat time. This includes both facilitated sharing and open conversation about the topics you're interested in at the moment. Any Peer Network member who wants to say hi... Read more

Hey Team,

I'm in a Living Future session where a number of manufacturers are talking about the low uptake they're seeing in their take back programs. Contractor friends... What barriers (if any) are you running into in using take back programs? How might we as architects help increase utilization of these programs?

Aley

Hello Green Gurus,

Some of you may have heard that the Sustainable Construction Leaders Group has been developing the Contractor’s Commitment, a set of sustainability guidelines for contractors to implement in their companies. 

The Contractor’s Commitment will be going live on November 13th with this half-hour webinar introducing... Read more

Now that Ben has set up access restrictions, we have to decide what message to put on "paywall" screens. For example, on the Best Practices pages, the "Official language" tab is fully accessible, but if an anonymous user clicks on any of the other tabs they'll hit a login wall:

https://live-bituser.pantheonsite.io/best-practice/energy-... Read more

Welcome to the quiz portion of The Death and Rebirth of DC Power. 

Learning Objectives
Upon completing this course, participants will be able to:


Explain when and how to integrate DC power into buildings, and the benefits of doing so.

Understand the history and background of AC and DC power in the U.S.

... Read more

Hi all,

Just like many of you, our firm is dedicated to increasing representation in the professions and through its relationship to the AIA Large Firm Round Table was able to access a National Organization of Minority Architects Fellow this summer. We’re loving our work with Himesh thus far, but it’s unclear whether we have the workload... Read more

Beginning this year, Miller Hull will not only continue to quantify the upfront embodied carbon of every project we finish through construction, but now purchase third-party certified carbon offsets equivalent to one-third of the project’s impact. Great design is no longer enough - we must take responsibility for our architectural impact in the... Read more

Dear all,

On a major renovation where the wall R-value/U-value needs to be brought up to energy code, specifically a mass wall situation, does anyone have insights on how the situation is best dealt with? On the project in question for me, the continuous insulation might have to be added to the inside surface of the mass wall and there... Read more

test

Hi all,

All members of the WA Building Code Council received an email from Tim Attebery of the Washington State AGC and I'm trying to make sense of the role of the AGC and whether it is representing the consensus option of general contractors in Washington or not. The letter is very much against the energy code advancement, which... Read more

Hello everyone. I am seeking some guidance on crafting an arguement for why my firm should support a change to the Washington State Energy Code which would mandate electric heat pumps for commercial builidngs.  AIA WA is working on the state commercial energy code update under consideration this spring.  We have been invited to sign on to an... Read more

* This gets complicated -- how much should happen on the dashboard and how much should happen in the actual Discussion forum?

Hold off on discussions for Phase 1. What should be here instead for... Read more