Welcome to the quiz portion of Five Reasons to Be Optimistic About Solar Energy!

Learning Objectives
Upon completing this course, participants will be able to:


Describe three ways how PV decreases environmental impact while increasing sustainability and health measures for communities.

Discuss PV life-cycle... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

I am diving back into Sefaira for the first time in a while, and the program still seems to be missing the ability to account for automatic daylight dimming in energy savings. Previously I had used an LPD reduction equivalent to emulate the savings automatic dimming would provide. Has anyone done a similar work-around? 

I wanted to make sure that everyone saw this.   Next Friday is a launch webinar for the Commitment.

Introducing the Contractor’s Commitment       November 13th, 2020          3pm - 3:30pm ET (12am - 12:30pm PT)

This webinar will mark the launch of the Contractor’s Commitment as a pilot program for 2021. We’ll give a brief overview... Read more

We are excited to open registration for the Sustainable Design Leaders Winter Summit 2020! This year’s Summit will take place Jan. 29th - 31st, 2020 at The Lodge, Gulf Shores, AL. The Summit agenda will be shaped by the collective group feedback given in the upcoming pre-summit survey. The Summit begins Wednesday evening (usually 5pm) with a... Read more

The Planning for Resilient Outcomes Working Group has had a few preliminary meetings and we would like to invite interested Green Gurus to join our group.  To give you an idea of what we are about, we have developed a purpose statement to guide our future work: 

The Planning for Resilient Outcomes working group will elevate the industry'... Read more

Hi everyone!

My awesome colleague, Paula Melton, is doing a short talk for USGC about mass timber and wants to know if there are SCLers in the group that can share their experience. In particular: 

"I’m wondering particularly about how supply-chain and cost issues are affecting availability and decision-making, and what the onsite... Read more

Hello all, there has been a fair amount of discussion about the emerging Cove Tool for early stage energy modelling and parametric optimization at our firm. I am very curious if any of you are using this software, and if so, what are your thoughts about it? 

https://www.covetool.com/

Thanks,

Esteban Matheus

Building materials emit massive amounts of carbon long before the lights go on.

In this course, BuildingGreen takes an analytical look at the greenhouse gases that are emitted in the process of constructing our buildings in the first place—the embodied carbon. The report focuses on how architects and designers, working with other key... Read more

Hi all,

Just a reminder that the last day to RSVP for the Living Future 2023 Peer Networks Meetup is tomrorow, April 26th! There are still some spaces left, with 34 people currently signed up. Please RSVP here if you'll be attending.

When: Wednesday May 3, 2023, 7:30-9pm ET

Where: SmithGroup, 1700 New York Avenue, NW, Suite... Read more

To piggyback off Nathan's introduction where he mentions construction waste management, who is doing anything innovative or different in managing construction waste?  Construction waste has not historically been a passion of mine, but now working in sustainability and construction, I feel like it has to be by default.  

We have a... Read more

from the Tortured by Randomness Department:

Y'all ... I was recently reminded (by Bill Reed) about a lovely quote ... and I'm keen to use it in a talk upcoming ... 

Here it is:
Place is a doorway into caring. Love of place unleashes the personal and political will needed to make profound change. It can also unite people... Read more

Cher Hiblthren

Hello SCL, I was asked by a friend at ILFI to share this invite specifically to the SCL group to join their Living Future 20 conference which is in a couple weeks and will be all online.  There is also an invite for a construction-only focused ILFI discussion May 14th in the message as well.  Hope everyone is doing alright out there.  Talk soon... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Why high-performance assemblies? And why now? Today we demand better thermal performance from our building assemblies than ever. But higher performance... Read more

Hi folks!

Do you have examples or case studies of projects with compelling examples of circularity/salvaged material reuse? We’re looking to go beyond the examples we've seen of furniture reuse or creating art from salvaged material, and we’d like to collect some examples to get our client excited about the possibilities in a deep... Read more

Welcome to the quiz portion of Know Thy Client: 9 Un-Green Strategies for Delivering Better Buildings

Learning Objectives
Upon completing this course, participants will be able to:


1. Focus on a client’s values to drive sustainability solutions.
2. Define the quality of the work being delivered to underscore... Read more

Hello SDLs!

Here are presentations from last week's 2018 SDL Summer Summit Show & Tell Presentations.

Best,

RoseAnn