I'm sure we'll learn more soon, but several people have asked on various platforms about how Betsy del Monte is doing (she lives in Asheville, NC, which was hard hit by Hurricane Helene). 

I had a brief text exchange with her on Saturday 28 September, and I feel sure that she would be OK with my sharing it with you all: 

We’re... Read more

Hello All,
Checking in on experience with Armstrong's Tectum E-N with NEOPOR Graphite polysytrene GPS rigid foam insulation core in roof panels for exposed structure?
BASF says that NEOPOR uses up to 30% less material than other rigid foam; it is greenguard gold cerified. 

Interesting that the NEOPOR increases in R-value as... Read more

Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

For those of you who are close to CLT and mass timber, has the jump in US wood price also impacted the pricing of CLT on your projects, or viability of CLT compared to the cost of steel or concrete frame buildings?  

If anyone has price data comparing CLT today to pre-Covid pricing or any metric that would describe the percentage change... Read more

We have a client thats going through a TI remodel in a building thats a LEED Core+Shell certified building. One of the questions we are trying to figure out is are there things we need to be doing to not imperil the building's certification. 

I think the answer is that the landlord had to write tenant guidelines at the time of... Read more

Team,

What are the M vs. E vs. P(FP) ratios of fee distribution you use in your company for a commercial office building?  How about a residential/hotel?

Best,

Luke Leung

Hello - Other than hiring an acoustic consultant, I am wondering what in-house tools you are using internally at the design stage for modelling acoustic performance? 

Thanks, Mona

Hi folks,

A press release about this just showed up--most of what they're including in their "Clean Construction Declaration" involves reducing embodied carbon in materials, but they're also calling out construction equipment:

"Procure and, when possible, use only zero emission construction machinery from 2025 and require zero... Read more

We're wrapping up a multi year project that went through multiple design changes, leaving us with a ton of material samples.  Does anyone know of a good place we could donate these samples to, to keep them out of the landfill.  I'm in the greater Seattle area.  Thank you for any suggestions.

Hello Sustainable MEP Leaders!

Here at BuildingGreen we are excited and looking forward to creating a valuable and engaging online summit with you all for 2020!

You can Register Here as well as review important information. The dates to mark on your calendars are June 9 - 11, 2020.

This is a crazy time, full of uncertainty... Read more

I received the following email from Naajia at Southface.  I'll be out of town until November 8, but I'll see if there's time for me to address at least the second part before I leave:

A question regarding the BIT-User Forum was brought to my attention by a participant. Apparently when you are posting a question and you pick your location... Read more

Welcome to the quiz portion of The Four Core Issues to Tackle for Resilient Design (And the Programs That Can Help).

Learning Objectives
Upon completing this course, participants will be able to:


1. Use site-specific hazard analysis to evaluate a project’s resiliency demands.
2. Use climate change data to... Read more

Hello, 

I am struggling with understanding if I should be using Annual Marginal Emission Factors (MEF) or Annual Average Emission Factors (AEF) for evaluating different building design decisions.

Everything I know is from this document. So as I understand it ... an individual building or retrofit is going to change the marginal... Read more

Hey Everyone!

We are delighted to share a major milestone in our commitment to sustainable design. After two+ years of intensive research, refining, and internal application, NBBJ is thrilled to announce the external launch of ZeroGuide, an innovative tool for early-phase carbon estimation, now available to the entire AEC community!... Read more

Following my retirement from BuildingGreen, I’m also looking to retire from the nonprofit Resilient Design Institute, which I’ve been leading since 2012. My default plan is to sunset the organization in the fall of 2024, but I wanted to offer the idea of someone (or multiple people) taking over the organization.

RDI is incorporated as a... Read more