Hi MEP Leaders,

I wanted to remind you that our monthly call is today, August 10th, at 2pm ET! This was rescheduled from the usual time - the second Tuesday of the month - due to a BuildingGreen staff retreat. If you usually can't make the Tuesday time, this is a great opportunity to join the call!

Here is the agenda, and below is... Read more

Love the profile of Anica as the "featured member" on AIA's website--congratulations, Anica!

It's great to see the "just do it" attitude to achieving the 2030 goals: "We do not rely on clients to tell us to design a high-performance building; we are going to do it anyway, it's our job."

reposting Arathi Gowda -

https://communityhub.aia.org/blogs/arathi-p-gowda-aia/2024/12/17/cote-ad...

The Advocacy team (part of the AIA COTE leadership group) would like to amplify actions the USGBC has gathered to defend the IRA. As you may know, the IRA is a bipartisan bill with 63,000 infrastructure projects starting nationwide... Read more

Pint-flush and non-water urinals can save tens of thousands of gallons of potable water per year. A single non-water-using urinal can save more than 10,000 gallons of water per year compared with the U.S. EPA standard of 1.0 gallon per flush (gpf).

When older 3.0 gpf urinals are replaced, the savings can be as great as 50,000 gallons... Read more

Hi all,

I'm trying to figure out how to use this CLF MEP calculator tool that is downloadable from the CLF website. Please see screenshot attached - does anybody know what they are asking for as an input?

"Custom quantities input: The user can enter custom quantities on this tab and produce numerical results. For data input fill '... Read more

<iframe width="560" height="315" src="https://www.youtube.com/embed/7tCYQiWxxyA?si=lzTgKz9JaQ50_8HT" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe>

Hi All, we have about 40 people in our network of Sustainable Construction Leaders.  These positions are not as numerous as they should be, and companies often have a difficult time applying a monetary value to what we bring to the table. 

Participating in the salary survey can provide insights that help us all interpret our relative... Read more

If you are intending to participate in the Sustainable Construction Leaders Pre-Greenbuild SUMMIT on November 13 in Chicago, please register. We are preparing the pre-Summit survey that will help to determine the topics on the Summit agenda. You will not want to miss having your top-of-mind challenges be part of the conversation with your... Read more

It’s hard to believe COP28 is upon us. Kicking off tomorrow (11.30) and concluding 12.12, it’s sure to be a full few weeks of sharing, live streams, and interesting takes.

We’ve been excited to see a few Peer Network members represented as attendees in Architecture 2030’s (in-person and virtual) delegation.

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Glazing is by far the most complex single component of our enclosures and it must be climate-tuned to boot. Getting the amount, the location, and the performance attributes of glazing is key to... Read more

Hi MEP Leaders,

I would not normally post a job on this forum, but Placetailor is seeking to hire a mechanical engineer.  They are one of only two truly sustainable developers that I've ever heard of.  They are an integrated developer / builder / design firm that builds everything they touch to Passive House and carbon neutral standards... Read more

Hi folks,

I’m excited to be welcoming Meredith Elbaum and Nellie Reid into this forum! Meredith and Nellie were the duo that originally conceived of the Sustainable Design Leaders network back in 2008, and led the effort (with BuildingGreen’s support) through it’s early years. 

They later left their SDL roles, so they haven’t been... Read more

Welcome to the quiz portion of Cladding: More Than Just a Pretty Façade

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how different commercial wall assemblies handle moisture.
2. Know what questions to ask to determine a cladding system's environmental impact.... Read more

Hi all,

Our team has been working hard to wrap up this year's SCL Summit Report, and we're excited to announce that it is finally complete!

https://docs.google.com/presentation/d/1zcSPctZ1BiyPQomiw4wTQLajR816mm3KJV0BL5B14-0/edit?usp=sharing

In addition to the usual summary of key points from the summit, this report captures... Read more

Anyone aware of tools or workflows for modeling of a specific outdoor space and effective surface temperatures?  We've done a goodly amoutn of microclimate simulations, but never explicitly factored in the ground surface, in terms of emissivity and other related factors.   

I really enjoyed last week's "Integrative Solutions Jam - Getting Better Materials Into Projects".  Thanks BuildingGreen for setting that up.  One of the great parts were the break out groups, where 4 of us could dig into various topics more deeply.

We got into a conversation about circularity and material re-use and Laura Soma with Gly... Read more

Hello All,

ASHRAE and ICC released a draft standard for operational and embodied GHG evaluation.  It's on a fast track to be completed in time for the next code cycle.  This 30 day advisory draft includes dozens of questions looking for feedback from experts like all of you.  Please take a look and provide comments.  I've uploaded the... Read more

Dear SDL'ers

After many months of soul searching about my role as a sustainability leader and how to have the most positive environmental impact, I have decided to take a leave from practice to pursue further studies this September. I will be undertaking a two year Master’s degree at the Institute for Resources, Environment and... Read more