Hello SAL Members - after last month's call, and invitation to do some thinking around the direction of the group, a few of us connected and brainstormed questions that might help guide and refine our network. It would be great to have a conversation around everyone's needs and goals, so if you could please take 5 minutes to respond to these... Read more

Hello - Other than hiring an acoustic consultant, I am wondering what in-house tools you are using internally at the design stage for modelling acoustic performance? 

Thanks, Mona

Welcome to the quiz portion of Changing Building Design Priorities for a Changing Electrical Grid!

Learning Objectives
Upon completing this course, participants will be able to:


Define a “Highly Variable Renewable Energy” generation asset, or VRE, and understand how VREs can most effectively contribute to the... Read more

There has been a lot of discussion re antimicrobials in this group, so here is a pre-release of this month's article on the topic. It's not an extensive feature, but I hope you find it informative.

Brent

* This gets complicated -- how much should happen on the dashboard and how much should happen in the actual Discussion forum?

Hold off on discussions for Phase 1. What should be here instead for... Read more

Hello Green Gurus,

Some of you may have heard that the Sustainable Construction Leaders Group has been developing the Contractor’s Commitment, a set of sustainability guidelines for contractors to implement in their companies. 

The Contractor’s Commitment will be going live on November 13th with this half-hour webinar introducing... Read more

Beginning this year, Miller Hull will not only continue to quantify the upfront embodied carbon of every project we finish through construction, but now purchase third-party certified carbon offsets equivalent to one-third of the project’s impact. Great design is no longer enough - we must take responsibility for our architectural impact in the... Read more

Imagine folks have seen this, but thought it was worth bringing up: this study which shows the great need to build new renewable infrastructure to support electrification.

I've been in a few discussions with folks where we've discussed how electrification is objectively a good goal, but are we passing carbon from one source to another?... Read more

Welcome to the quiz portion of The BuildingGreen Guide to Insulation!

Learning Objectives
Upon completing this course, participants will be able to:


Successfully managing the LEED documentation process requires specific knowledge, tools and skills that are not covered in the LEED Reference Manual. This condensed, online training is based on the LEED Project Management course that GreenStep developed and teaches through the University of California–Berkeley. As part of this interactive... Read more

Choose a photovoltaic (PV) system to fit your energy needs, budget, and the space you have for installing the modules.

BuildingGreen-Approved PV

BuildingGreen approves PV modules that have high warranted minimum power ratings and high PTC (PVUsa test conditions).

Building-integrated PV (BIPV) products approved by... Read more

Https://www.metropolismag.com/architecture/yale-un-environment-eco-living-module/pic/44437/

Many of you will be passing through NYC on your way to the SDL Summit in Garrsion this week. I encourage you to make a pit stop at the United Nations. You’ve heard me talk about the next generation, tech transfer building systems... Read more

SAVE THE DATE: ALL Peer Networks Show & Tell
Tuesday, November 19 | 8pm - 10pm
The Kendeda Building, Georgia Tech | Atlanta, GA

Start your time at Greenbuild on a high note!

Join your Peer Networks Colleagues from SDL, SCL, MEP, SDLS, and SAL for a high energy evening full of lightning round previews of the best... Read more

We have a client thats going through a TI remodel in a building thats a LEED Core+Shell certified building. One of the questions we are trying to figure out is are there things we need to be doing to not imperil the building's certification. 

I think the answer is that the landlord had to write tenant guidelines at the time of... Read more

If your HVAC designers are addicted to the crack that is Trace 700, and knowing that Trane is giving up on that product in the coming year, what loads program are you weaning* them onto?

Asking for a friend:  Have any of you had success in using the Revit plug-in for loads?

*When told that they should use IESVE for loads, our HVAC... Read more

What a great first day!

Here are the slides from the show and tell presentations last night at SOM's office; everyone who presented with slides has given approval to share them.