Hi folks,

No details have been sorted out yet, but I wanted everyone to have a heads-up that the SCL Steering Group is proposing that we graduate to a full, stand-alone SCL Summit in 2020. (Until now we’ve been squeezing our Summit into the day before Greenbuild, which is good in some ways, but problematic in others—and limits our time... Read more

Hello- If you use Procore....

Are your jobs using a template to conduct and create "reports" of their IAQ inspections? Did you set it up in forms or inspections? Would you mind sharing an example template with me? I know Green Badger has a great app to do this, which we use. We would use inspections in Procore for jobs that are not using... Read more

Hi All,

After this long winter, who is up for some fierce creativity and friendly competition in your own offices or between your companies?  What do you think of a location agnostic, virtual, Sustainability Scavenger Hunt from Earth Day to Mother's (earth) Day?

We've done the hard work for you. Join in on the fun and save your... Read more

Welcome to the quiz portion of Choosing Insulation: High-Performance Roof Assemblies and Retrofits – Unit 4.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain the industry trajectory of healthier alternatives to foam insulation.
2. Describe the nuances of insulation... Read more

Furnaces heat air that is then distributed through ducting and warm-air registers.

Approved by BuildingGreen

Products approved by BuildingGreen include the highest-efficiency, sealed-combustion furnaces and high-efficiency wood or multi-fuel furnaces. A multi-fuel furnace uses several sources of energy such as wood, wood-pellets,... Read more

I’m writing to see who would be interested in collaborating during the month of December on a position paper that would be given to the incoming Biden administration, outlining things that firms in our industries (i.e. architecture, engineering and construction) would be excited to see advanced as part of Biden’s Build-Back-Better (BBB) program... Read more

Hello Folks,
What is your experience with successes and failures in the design process? As a starting point I have listed my Top 5 for success, and my Top 5 for failure. We'd love to see your reactions and look forward to the discussion when we all meet next week at our monthly check-in.

Top 5 reasons for when integrative design... Read more

Jenny/Dan:

What types of content do anticipate having in the Documentation Toolkit tab? Here's an example of what we have on LEEDuser:

https://leeduser.buildinggreen.com/credit/EBOM-2009/SSc5#tab-docs (login required)

The layout is a little complicated on LEEDuser, since we had to work with a lot of legacy content, but... Read more

Who all is implement 360-degree reviews as part of their employee review process?  Lake|Flato is thinking of implementing this and would like to talk to a few other firms who have experience they would be willing to share.  Please contact me if you'd be up for a short email discussion or phone call to discuss.  hholdridge@lakeflato.com

... Read more

Welcome to the quiz portion of Cost-Effective Green Retrofits: Opportunities for Savings in Existing Buildings.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define the term retrocommissioning and list at least three examples of how it might help commercial building owners.... Read more

All,

Can anyone suggest a product for the following situation.  We are looking to insulate existing aluminum eterior column covers that have a three inch air gap.  The issue is there is no way to remove the covers without destroying them.  we would like to cut small holes, pump in the insulation  and then cap the holes.  Can anyone... Read more

We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

Friends of EPIC –

Hey, everyone. As some of you might have heard, we’ve been working for a while with Autodesk to get c.scale (the data model behind EPIC) built into Forma – Autodesk’s AI-powered planning tool. Forma is packaged within Autodesk’s AEC collection and most firms using Revit should already have access. This integration is... Read more

Hello, All!  I'm hoping for your help to keep a green roof on a project of ours.  We have a large healthcare project in the Midwest that is coming in over budget.  To avoid losing our extensive green roof, I'm looking for alternate sources of funding - grants, private sources, etc.  Has anyone gone down this path before and have shareable... Read more