First, there was Energy Use reductions

Then there was embodied carbon

Soon it will be refrigerant use/leakage calculations

…and much more

As coordinators and leaders of project teams, what does this look like for the practicing architect and our collaborators?

I have no idea. BUT I’m guessing someone is... Read more

Here is a fundamental question regarding measuring operational carbon emissions that I'm sure many of you can clarify for me:  Let's say you are considering design options and you want to know the relative contribution of GWP of adding an additional inch of continuous insulation to the building envelope.  The GWP from embodied carbon will... Read more

Welcome to the quiz portion of Community-Scale Sustainability: Accelerating Change for People and Planet

Learning Objectives
Upon completing this course, participants will be able to:


Explain how combining stakeholder efforts and resources can achieve greater resilience and sustainability for communities.

Discuss... Read more

Hi All, I was initially reluctant to share this, but I've seen similar posts and I think it's in line with our mission and interests so I'll go ahead with it.

Tomorrow 12/9 at 1 PM EST I'm moderating a panel of industry leaders in public health (as it pertains to buildings), construction finance, and project development to review the... Read more

Hi All,

How are folks funding training for your employees? Would it help to have free training opportunities besides lunch and learns or ones you do yourself?

For those of you outside of Massachusetts you may have employees or friends in MA that this could be relevant to.  I'm hoping my friends in MA have already heard this.

Prefabricated, or modular, buildings can provide environmental advantages over conventionally constructed buildings. They are built in factories where manufacturing and cost can be tightly controlled, so materials are kept out of the elements, there is less waste, and thermal properties and air sealing can be enhanced. There are also fewer... Read more

Welcome to the quiz portion of Cost-Effective Green Retrofits: Opportunities for Savings in Existing Buildings.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define the term retrocommissioning and list at least three examples of how it might help commercial building owners.... Read more

Hi all,

Thanks again to those who presented at the AIA Show & Tell! Here are the slides for some of the fascinating presentations we saw. Please do not share the slides outside of the networks unless they are marked “PUBLIC.”

There may be more to come; if you presented but did not yet provide permission for your slides to be... Read more

The Path to Zero Carbon is a series of rigorous, deeply researched white papers produced by Kjell Anderson and others at LMN Architects in collaboration with subject matter experts from across the industry--including some of you! Architecture 2030 is exploring capacity and funding needs to host and convene experts to regularly update the series... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

In simpler times, our buildings were made primarily from local, natural substances like stone, wood, straw, and clay.

But lifestyles have changed dramatically since these were... Read more

Friends,

Through AIA work I have been working with Kim Shinn from TLC Engineering. Kim is involved on the ASHRAE 209 development and has been advocating that the AIA, ASHRAE and USGBC align around this standard. Personally I think this is a good idea as I expect that this standard could easily make it's way into regulations and contracts... Read more

Hello lovely Green Gurus. Hope you all are well. I am wondering if anyone has installed an indoor sports floor that performed well and is low-emitting. This is for a multi-purpose gymnasium at a community center. Any chance?  Thanks All!

Hi all,

We have a project in New Orleans that needs to meet the GSA Inflation Reduction Act (IRA) requirements and submit EPDs. For our concrete, there is only one manufacturer that meets the requirements and is more than 50 miles away (according to EC3). Does anyone have tips on attempting to talk to local concrete manufacturers about... Read more

Hey group,

I'm part of the contractor team on a large commercial project pursuing LBC v3.1 Petal Certification, with one of those petals being materials. This requires the team to meet Imperative 10 Red List.

The ownership group has taken the responsibility of red list vetting as a task of their own. The construction team is to... Read more

Caseworks can be made from unsustainable wood and other materials, and with adhesives and finishes that offgas formaldehyde and other hazardous compounds.

BuildingGreen-Approved Casework

Approved caseworks are:

Hey, everyone! Many of you on this forum have probably already RSVP'ed but I wanted to put a plug out there for the happy hour event on the evening of November 2nd at our office in San Francisco.

The event is co-hosted by Architecture 2030 and national and local AIA COTE. There will be food, drinks, great people, and a chance to preview... Read more

Hi folks, 

For those who have already been involved, this is a friendly reminder that our next Sustainable MEP Leaders call is Monday the 29th at 11 a.m. Eastern Time. Here is the Zoom link to join, and here is the agenda for the call.

We have also had a couple of new people join the network – welcome to Cindy Cogil and Sergio... Read more

Hello there, 

I am working on a project with indoor plants and active green walls. I would like to design lights for growing plants and people at the same time (which seems to be a non-obvious problem). 
 

I was thinking of Philips, GE, Shneider Lighting, etc. Would you recommend someone I could talk to and eventually engage... Read more