Hi Everyone,

Please mark your calendars for next Tuesday, March 17th, 2020 3pm ET (Noon PT) for an SCL webcast with Mark Chen at Skanska and Emi LaFountain at Turner Construction on Quantifying Jobsite Carbon Emissions. 

Description:

Quantifying Jobsite Carbon Emissions w/ Turner and Skanska
The focus of embodied... Read more

Welcome to the quiz portion of Building Re-Entry with Arc

Learning Objectives
Upon completing this course, participants will be able to:


1.  Explain the similarities and differences between LEED v4.1 O+M performance metrics and the Arc Re-Entry program.

2.  Understand how Arc Re-Entry contributes to an iterative re-... Read more

Evaporative coolers use far less electricity than conventional refrigerant-cycle air conditioners and they operate without the use of refrigerants, both features that make them attractive for green buildings. However, their suitability is limited to drier climates, and most products use significant quantities of water.

BuildingGreen... Read more

Many of you have heard me speak of our foundations effort to host a conference in Houston this November that is focusing on the social and economic side of community resilience preparedness. While we purposely are emphasizing these topic areas, we do see the importance of these conversations being witnessed by the design and planning community... Read more

Hi all,

Just like many of you, our firm is dedicated to increasing representation in the professions and through its relationship to the AIA Large Firm Round Table was able to access a National Organization of Minority Architects Fellow this summer. We’re loving our work with Himesh thus far, but it’s unclear whether we have the workload... Read more

Greetings all, and welcome to all those who already introduced themselves!  My name is Steven Burke and I am a Sustainability Manager at Consigli Construction in Massachusetts.  We are East Coast only, but we have a few offices from DC up to Maine.  I’ve been helping Jenn and Nadav get this group up and running, and I’m relatively new to the... Read more

For a number of years a colleague and I have been teaching a course about sustainability and water in architecture at the University of Pennsylvania's architectural school (PennDesign).  This year we're hoping to bring a few new opinions to the table for at the same time as we broaden the discussion.  Because the class will be virtual again... Read more

Hello SAL Members - after last month's call, and invitation to do some thinking around the direction of the group, a few of us connected and brainstormed questions that might help guide and refine our network. It would be great to have a conversation around everyone's needs and goals, so if you could please take 5 minutes to respond to these... Read more

My colleague, Kira Gould, from the AIA National COTE communications committee, has a great question I am reposting here...

AIA National COTE: In the early 00s, COTE supported an initiative through which we created a Guide to the Green RFP and collected sample RFP language. That now dated guide is no longer findable in our resources and... Read more

Hi SDL'ers, as promised I am sending information about how to support getting flame retardants out of foam insulation. I am attaching a draft letter to Foam Manufacturers, an intro to that letter giving some background and a list of From manufacturers.   Thanks, please contact if you have any questions.   Larry Strain, Siegel & Strain... Read more

Welcome to the quiz portion of Choosing Insulation: High-Performance Wall Assemblies – Unit 3.

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe key environmental and performance factors for insulation materials.
2. Recount bottom-line insulation material... Read more

Great career opportunity to make an impact on existing buildings and emissions reductions. City of Seattle will be hiring a full time Building Emissions Reduction Technical Advisor. Closing date to apply is August 6. Please share if you know someone who may be a candidate.

Description from city of Seattle:
Want to influence large... Read more

Hi Sages,

Thanks to those who filled out the survey and helped set our agenda for Monday's meeting. We know that this time doesn't work for everyone (no time could, of course), so we'll be alternating times each month. The April meeting will be Thursday, 4/11 at 3:00 eastern.

The agenda is here. It also has the Zoom link (in case... Read more

HI All,

I am curious if others are using THERM in-house for your envelope design?

We usually use our building envelope/curtain wall consultants (Boston - so mostly RWDI and Heintjes) but our teams are finding that they need the information faster than our consultants can provide, they are backlogged, or we have some curtain wall... Read more

The current Stantec/BuildingGreen featured topic is Material Health. Read on to learn the essentials, and then dive deep to earn CEUS.

Also see the Resilient Design featured topic, and also a survey of topics trending in Stantec’s regions.... Read more

Friends of EPIC –

Hey, everyone. As some of you might have heard, we’ve been working for a while with Autodesk to get c.scale (the data model behind EPIC) built into Forma – Autodesk’s AI-powered planning tool. Forma is packaged within Autodesk’s AEC collection and most firms using Revit should already have access. This integration is... Read more