Looking for an example or case study for a building utilizing a radiant heating/cooling in climate zone 4a. General use type is office with some public assembly spaces, total of 85,000 sf.

As usual, everyone, especially mechanical engineer, is terrified by the thought of "condensation." So far, I read a DGWW case study, "Energy... Read more

The results from the "CogFx" study are compelling, showing that people in environments with low VOCs and low ambient CO2 levels score higher on tests of cognitive function.  Specifically, they show that providing 40cfm of outdoor air per (actual live) occupant results in significantly higher scores than even the "Enhanced Ventilation" scheme... Read more

Ventilation fans, kitchen range hoods, and laboratory fume hoods can use significant amounts of energy from both the fan motor and from venting heated/cooled air out of the building—air that then has to be replaced and conditioned by energy-intensive HVAC systems.

BuildingGreen-Approved Ventilation Fans

BuildingGreen ventilation... Read more

Hello SCL members,

A gaping hole has been left since Patty Lloyd stepped down from our SCL steering committee. Don't worry, she is still in the network and tirelessly championing SCL. But this means we are opening up nominations for at least one leadership spot. If you are interested, please email me directly (candace@buildinggreen.com)... Read more

On LEEDuser we divide checklists into multiple project phases. Specifically:

How many of these phases are relevant for BIT best practices?

Note that we also... Read more

Hi All,

How are folks funding training for your employees? Would it help to have free training opportunities besides lunch and learns or ones you do yourself?

For those of you outside of Massachusetts you may have employees or friends in MA that this could be relevant to.  I'm hoping my friends in MA have already heard this.

Hi All,

My team member is leaving Webcor, and unfortunately that means we have to fill her big shoes with someone new! I thought I'd reachout here and see if you know anyone of high caliber looking for a Sustainability Manager position? Someone with LEED PM experience preferred, and a bit more technical background with MEP/ZNE ideally... Read more

How interested are you in a Sustainable MEP Leaders Summit this summer? 

Please respond to this poll ASAP, as we need to gauge interest before we finalize any details.

When: Wed. July 26 at noon to Thurs. July 27 at 1:30. 
Where: At a conference facility near Boston
Cost: $1200, which includes lodging, meals, and... Read more

Under a high carbon scenario, most of North America will be 2 degrees C hotter by 2050. Meantime, we're designing buildings that will still be around in 2050, to codes that don't yet factor in chronic risks associated with climate change. I want to explain these risks to my colleagues; I'm hoping some of our green gurus can help answer the... Read more

Welcome to the quiz portion of Can Commercial Kitchens Go Electric?

Learning Objectives
Upon completing this course, participants will be able to:


Understand why building electrification can be better for the environment and human health than use of fossil fuels, including natural gas.

List eight reasons... Read more

Jake Gehrung
 

Hey group,

I'm part of the contractor team on a large commercial project pursuing LBC v3.1 Petal Certification, with one of those petals being materials. This requires the team to meet Imperative 10 Red List.

The ownership group has taken the responsibility of red list vetting as a task of their own. The construction team is to... Read more

Hello Green Gurus,

Here's another Peer Networks Webinar for September, Prospects for Sustainable Buildings in Congress. We hope you will join us!

Reminder: This webinar is for Peer Networks members only.

I'm waiting to confirm with the presenters whether this will be recorded. Watch this space for updates!

Register... Read more

We have a client who is asking us to design a roughly 10 ksf Wellness Center for PHIUS 2021 certification.  The program includes several high density assembly type spaces - roughly 300 person peak occupant load for the building.  The Criteria Calculator that the architect showed us puts the building peak cooling load at 4 BTUH/sf (3000 sf/ton... Read more

Hi all, 

Internally in our organization, we seem to have plenty of horizontal (infrastructure) resiliency expertise, but I'm finding the vertical resources to be lacking. I'm hoping to build a collection of beginner- to intermediate-level resources to help guide practice/design standards for our reference. Any pointers on good info... Read more

Welcome to the quiz portion of Programming Buildings for Health: WELL, Fitwel, and Beyond!

Important: This quiz covers all related articles within this topic. Scroll to the bottom of the article page to find links to all the articles covered by this quiz.

Learning Objectives
Upon completing this course, participants will be... Read more

Hi,

I selected a new background photo for the home page (the previous one was the same as on LEEDuser.com). I found the photo here:

https://www.pexels.com/photo/low-angle-shot-of-building-1029618/

I needed to find something low-contrast that wouldn't compete with the text. I initially tried some of the stock photos... Read more