Hi all,

Thanks again to those who presented at the AIA Show & Tell! Here are the slides for some of the fascinating presentations we saw. Please do not share the slides outside of the networks unless they are marked “PUBLIC.”

There may be more to come; if you presented but did not yet provide permission for your slides to be... Read more

Hello all, 

Wondering if anyone has experience with lead limits in electrical cable and wiring? 

LEED for Healthcare allows a limit of 300 ppm of lead in electrical wire and cabling - my search for compliant products has been all dead ends. (MRc PBT Source Reduction - lead, cadmium, and copper)

Acceptable regulations for... Read more

We are embarking on our first CLT projects (our at least we hope that they go that way). Would anyone with experience be willing to share some thoughts from the architect's perspective on things to consider, lessons learned, etc?

Hi Everyone!

I am now in my last week in the Bay Area, and in my last three weeks at (my first 15 years at) SERA, as I will be leaving on my extended sabbatical at the end of April!

I will miss following this group's dialogue, and will especially miss attending the summits for the next couple of years! 

My colleagues Mark... Read more

Our high performance consulting team is frustrated by project teams that regularly fall back on outdated rules of thumb in their system and equipment sizing. 

What challenges do you face in your work flow to limit oversizing and promote right-sizing?

By the way, Roger Chang, our literature search on the subject turned up an eleven... Read more

Greenbuild 2018 has a new feature – the People’s choice.  This is where you can vote for sessions that sound interesting.  I have been scrolling through this list and I am seeing a lot of great sessions, and familiar names.

So let’s crowd source this one.

Go here https://www.greenbuildexpo.com/en/education/peoplesvoice.html to... Read more

We are looking to refine our general office specifications to weed out harmful materials and to prioritize sustainability for all of our clients. Have you had good experience with outsourced specification writers who are helping to push sustainability forward? Who do you recommend? Bonus points if they are familiar with Massachusetts codes and... Read more

Hi folks,

If you're registered for the Summit, you should have gotten this message from me separately, but I wanted to post it here too to be sure. It would be great if everyone coming from out of town could stay together! We've achieved critical mass in terms of Summit participants--this is going to be a great and impactful gathering!... Read more

Standard HVAC systems require large fans and ductwork to move conditioned air throughout a building, which wastes energy and building space.

BuildingGreen-Approved Chilled Beams

BuildingGreen lists chilled beams that rely on water and smaller ducts to provide HVAC throughout a building.

Performance and Health Considerations... Read more

Hello! Does anyone know of any general contractors who produce a CSR? Is anyone aware of any general contractors who have an ESG rating? If so, what company is being utilized (i.e. EcoVadis) to get the ESG rating?  

Hi GG: Just wanted to make sure you know about a free webinar that Buildings & Cities and Carbon Leadership Forum are putting on:

Zero Carbon: Can Built Environment Education Deliver?

Monday 8 February 2021, 9 – 10 am PST

Details and registration through this site:

https://carbonleadershipforum.org/zero-carbon-... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Practitioners interested in reducing the embodied carbon of buildings are likely now used to considering the impact of different materials, like mass timber or low-carbon concrete. Low-carbon... Read more

We're consolidating our office and I find I have back issues of EBN going back to 1999 on the bookshelf. Any use for these other than compost?

Reminder: For anyone interested in continuing to participate in the Climate Smart Wood Working Group, please note that we have joined the other CSWG and will have our first meeting next Wednesday.  Visit the Working Group page for the meeting invite and agenda.

Welcome to the quiz portion of Work Globally, Design Locally!

Learning Objectives
Upon completing this course, participants will be able to:


Understand how sustainability and regionally sensitive design mesh in various projects.

Identify what metrics or indicators keep track of success in... Read more

Hi MEP Leaders!

Here's a reminder that our monthly meeting is coming right up--today at 2:00 pm ET.

There is a lot to talk about: James has put together a starting point for our "how to make the best use of your engineer" guide. And Summit plans...

You can view the agenda here.

All members of the SMEPL network are... Read more

Hey there SDLs!

We're having a debate in our firm about whether we're at a tipping point to hire an in-house energy modeler - someone capable of doing an MEP-caliber energy model inside a design firm. I know some you have in-house energy modelers on staff and I'd love to hear your experiences:

- How did you know your firm was at a... Read more