Does anyone here have a draft spec for low embodied carbon concrete they could share? I see the GSA has a standards sheet with MGWP limits, but we are hoping to actually specify the mix for upcoming projects.

I am looking for case studies/trying to identify buildings using concrete mixes with upwards of 30% replacement of cement by SCMs.  I've been in conversations with some structural engineers who are interested in lowering embodied carbon in upcoming projects, but would like to see examples of where this level of replacement has been successfully... Read more

Does adding solar panels reduce a building's EUI?

Existing operational use of a building is 80 kBtu/sf/year. When we add solar, it will change the source of energy but does not change the usage.

My understanding is that the EUI does not change, but it would be good to hear from others.

It's energy consumption at the point... Read more

Hi all, curious if anyone is involved with development / advocacy for the new MA stretch code? https://www.mass.gov/info-details/stretch-energy-code-development-2022 

My firm recently added a Boston location & I'm slowly getting to know the green building world there - would love to know if anyone is organizing public comments on the... Read more

Southface will need a procedure for adding and assigning SMEs to the BITuser site. Normally you could just create the user in BITuser and assign the role right there, but we have the added complication of Salesforce SSO, which means the sequence will have a few extra steps.

Here's the basic outline:

The Center for the Built Environment (CBE) at the University of California, Berkeley is conducting a survey to understand current practices and outlooks among design practitioners: architects, engineers, energy modelers, and related professionals. Our goal with this work is to improve climate change adaptation guidelines that support building... Read more

This is specifically to Chris but also to anybody who is interested in the topic - which Chris raised on our SAL call today, regarding how to influence change:

From this article, which i thought was good but had a great paragraph pulled below.

https://www.nytimes.com/2020/02/12/business/Steve-Mollenkopf-Qualcomm-corner-office.html... Read more

In our quest to create a low carbon future the lectrification/Decarbonization working group is planning spend the next 10 months creating tools to advocate for electrification:

Welcome to the quiz portion of Better Steel, Lower Impacts!

Learning Objectives
Upon completing this course, participants will be able to:


Understand the process of how steel is made.

Recount how the U.S. steel industry has been improving its environmental footprint, while improving product performance.

... Read more

Jason F. McLennan

test

As announced in last week's SDL/SCL Winter Summit, I have been working with a group of regional AEC professionals, industry stakeholders, and the New Buildings Institute on two code proposals to the 2021 Seattle Building Code that limit the Global Warming Potential (GWP) of concrete & steel in buildings over 50,000 sf (see attached).  We ... Read more

Hi Sages,

As you may have seen in my message, the Peer Networks Member List is not very helpful to us (yet), because a person can only show up in one network. Many of us are also in SDL or other networks; there are many more of us than show up when you filter that list for "Sages."

Until we can get that fixed, we'll share the... Read more

Have you been perusing the recently launched Contractor's Commitment and thought to yourself, 'Companies are going to need more guidance/templates/resources if they're actually going to implement this thing'? Good--now's your chance to help develop those resources.

The Contractor's Commitment Working Group is meeting December 1, 1pm ET.... Read more