Green gurus!

We're getting some interest from clients abroad on two specific materials which we don't have experience with here in the U.S.:

1) Cross Laminated Timber (CLT)

and/or 

2) CarbonCure concrete

Anyone willing to share lessons learned on these material either here in the forum or offline? Or point me... Read more

We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

To piggyback off Nathan's introduction where he mentions construction waste management, who is doing anything innovative or different in managing construction waste?  Construction waste has not historically been a passion of mine, but now working in sustainability and construction, I feel like it has to be by default.  

We have a... Read more

Good Afternoon -

I'm wondering if anyone has a sample project wellness plan or survey that they'd be willing to share?  The 2.0 says additional resources are coming soon but I have a few project engineers that want to help get these going and are looking for a starting point.

You can email me direct if you don't want to post here... Read more

Hi Everyone.  Hope you and your families are all healthy and safe.

We are starting to figure out how we are going to implement the Contractors Commitment at my company, and we're using the opportunity to simultaneously set corporate wide and jobsite metrics and goals for sustainability tracking.

Each year we issue a sustainability... Read more

Hi everyone! I saw that BuildingGreen won't be faciliating a meet-up in Atlanta but are there any other peers attending Living Future next week and want to self-organize? If we can find a venue - i wonder if there are any locals on this list with a recommendation? Could do Wednesday 7-8:30 between the two scheduled reception and after-hours... Read more

Hello all, there has been a fair amount of discussion about the emerging Cove Tool for early stage energy modelling and parametric optimization at our firm. I am very curious if any of you are using this software, and if so, what are your thoughts about it? 

https://www.covetool.com/

Thanks,

Esteban Matheus

hi all! I'm almost at the finish line with this year's 2030 reporting...whew. I'm running into an issue that I wanted to throw out to this group, regarding the zero tool and national average baselines. Hoping some of y'all who manage your firm's 2030 data, or are just more familiar with CBECS and related data, have some insight / experience to... Read more

High-performance buildings integrate site-responsive orientation, climate-responsive form, hefty R-values, efficient mechanical systems, healthy... Read more

Can furniture be hazardous? You bet it can…

From flame retardants in foam cushions to unnecessary stain and dirt repellents on upholstery materials, everyday... Read more

Hello all,

This month's SCDL call was full of great discussion! We decided this month that we are feeling good about where we are for the Task Force Agreement on defining social sustainabiltiy in our work. The aim is to work with this agreement for a while and see if it holds up as a process framework. There was also interest to invite... Read more

Glazing connects occupants to the outdoors, but with so many opportunities for air leakage, poor insulation, and thermal bridging, glazing is the primary weak link in building energy performance.

BuildingGreen approves glazing that offers strong energy performance properties for a variety of... Read more

Welcome to the quiz portion of Five Reasons to Be Optimistic About Solar Energy!

Learning Objectives
Upon completing this course, participants will be able to:


Describe three ways how PV decreases environmental impact while increasing sustainability and health measures for communities.

Discuss PV life-cycle... Read more

I have to admit that I wasn't particularly paying attention to LEED during Greenbuild, but anyone recall the "big announcement by USGBC" that LEED v4.1 is coming?

Article can be found @ Green Building Law Update by Stuart Kaplow and the title is "LEED v4.1 Announced by USGBC at Greenbuild."

https://www.greenbuildinglawupdate.com/... Read more

Hello SDLs!

Here are presentations from last week's 2018 SDL Summer Summit Show & Tell Presentations.

Best,

RoseAnn

Hey y'all,

Since it's now past September 8 when reporting was due, I'm thinking all those that were going to report as part of this round have now done so. I know AIA will assemble an industry-wide report, but I'm also very interested in the less polished conversation that allows all of us to trade experiences and just see how this went... Read more

Pipe that delivers domestic water in North America is typically made from copper, chlorinated polyvinyl chloride (CPVC), cross-linked polyethylene (PEX), all of which present environmental challenges. Bimodal polyethylene  (PE-RT) and polypropylene (PP) are potential alternatives with lower climate and health impacts.
... Read more