Last summer I shared a request here for folks to take a survey we had open that aimed to understand how architects and engineers are (or aren't) using climate projections to inform design. This white paper, written in collaboration with HGA and the University of Minnesota Climate Adaptation Partnership, reports on the results of that research. ... Read more

I’m a volunteer member of the ASHRAE 209 ("Energy Simulation Aided Design for Buildings Except Low-Rise Residential Buildings”) Committee.  Are you familiar with ASHRAE 209? It was first published in 2018, and it outlines a process for incorporating energy modeling into the design process. 

From the forward: 

 ASHRAE Standard 209... Read more

Caseworks can be made from unsustainable wood and other materials, and with adhesives and finishes that offgas formaldehyde and other hazardous compounds.

BuildingGreen-Approved Casework

Approved caseworks are:

Hello all,

We are looking at ways we can use our specs to reduce toxicity in projects and one step towards that goal may be to require RoHS compliant lighting, switches, alarms, meters, etc., as required by the Small Electrical Components exception in the Living Building Challenge. Based on LBC projects I have been involved with, it... Read more

Amal June Polt

Hi,

Does anyone have experience or advice with installing temporary weather stations to gather data? We have a couple of projects coming up on existing occupied sites, and I would like to get what data I can from the sites to supplement the city weather file which is, as always, measured absolutely miles from site. There are thousands of... Read more

So every year about this time I get to spend many lovely moments with our AIA 2030 Reporting data. In order to make the data useful the CBECS baselines/National baselines aren't great in telling us how we did.

For about half our 15 projects that we report in the average year - performing arts, convention, data science schools, etc - a... Read more

Welcome to the quiz portion of Five Reasons to Be Optimistic About Solar Energy!

Learning Objectives
Upon completing this course, participants will be able to:


Describe three ways how PV decreases environmental impact while increasing sustainability and health measures for communities.

Discuss PV life-cycle... Read more

For those folks who are on our retrofit electrfication roadmap post-palooza-sub-sub-working group ;-) , I thought you might be interested in these three guides just released from BEI in collaboration with S. Winter Associates.

Here are the three Playbooks:

HI All,

I have been tasked with putting together a cost comparison of doing a LEED v4 Gold building vs. making that same building Passive House. Obviously they are two different systems, with two different outcomes, and it's not really intended as a total apples to apples cost comparison, but more a value comparison for a developer.... Read more

Hi All! This is a question for NYC and surrounding area (but if its the right fit, could extend beyond)! 

Can anyone recommend a designer for healthy and sustainable furniture for an affordable housing development?  The spaces that need funiture are: a community facility, common spaces, and residential units (for formerly homeless). ... Read more

Welcome to the quiz portion of Video: Insights to Success on LEED-CI Certification.

Learning Objectives
Upon completing this course, participants will be able to:


1. Identify key changes to LEED CI 2009 (ID+C).
2. Identify the circumstances of a LEED-CI project that challenge the abilityto certify.
3.... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Are your clients asking you about wellness? You’re not alone. Healthy interiors and wellbeing are the trending buzzwords of sustainable design. In this hour-long live webinar, GreenStep Education's Alex Spilger will walk you through the seven concepts within WELL and describe what sets... Read more

Hello, all! I'm working on an in-depth article about adaptive thermal comfort. I'm looking for interviewees who have real-world experience of working with ATC on a project, including occupant feedback. If you have that kind of experience, I'd love to hear from you!

This is happening on a very tight timeline, so please get in touch with... Read more

I am the Sustainability Program Manager for Sellen Construction in Seattle, WA where we build healthcare, education, office buildings, museums, historical renovations, and unique structures like sculpture parks and the “spheres” that have been in the news lately.  My role blends environmental regulatory compliance, sustainability in field... Read more

Our firm held off from signing the AIA Materials Pledge because it was perceived as a feel-good commitment to promise to have good intentions, with no tracking.  I was pleased to learn yesterday that reporting for signatories of the AIA Materials Pledge would "open" today (July 18) and close August 31, and would include mandatory reporting on... Read more