Received answers from below questions from NIST Andy Persily

1. Is there a preferred bookends range of CO2 for both “optimal” energy and human performances?

Andy: No

2.Is the ASHRAE ventilation of 1000-1200 ppm average, probably not based on performance, suggesting current ventilation rate is sub-optimal with cognitive... Read more

Metal windows are used in commercial building because of their durability, low maintenance, and ability to handle wind loads.

BuildingGreen-Approved Windows

Metal windows must achieve an NFRC-certified unit U-factor of 0.20 or lower to be approved by BuildingGreen.

Manufacturers also must demonstrate that their highest-... Read more

Congratulations on the site launch!  One problem, though... you appear to have overlooked the home page orientation video. Currently there's just a placeholder image that doesn't actually do anything. Did your team end up producing a BIT User video?

Hello,

This is not my area of expertise but our contactor has suggested central heat pump hot water (CHPHW) is $1m more expensive than gas fired domestic hot water for a 150 unit multi-family residential building in Massachusetts. The Building Decarbonization Practice Guide is extremely helpful but, from their comments, it is all coming... Read more

Hello all, 

Wondering if anyone has experience with lead limits in electrical cable and wiring? 

LEED for Healthcare allows a limit of 300 ppm of lead in electrical wire and cabling - my search for compliant products has been all dead ends. (MRc PBT Source Reduction - lead, cadmium, and copper)

Acceptable regulations for... Read more

Hello Green Gurus!

Here is a [LINK] to an updated version of the letter, including all the signatories we had as of last Friday - thank you all!

This message is really geared for your firm's social media/communications team, so if you aren’t that person, please share this message with them! With that said, all of you (whether your... Read more

Hello All,

Through a regional School of Architecture, our firm has been connected with a very intriguing startup that has been engineering a new rooftop wind energy technology. They are developing a system to economically capture the increased wind flows at the edges of commercial building rooftops. They have engineered this system,... Read more

Big news! It’s being announced today that the amazing Lindsay Baker will be ILFI’s new CEO—she’s starting the job next week.

Lindsay is talking about bringing a new focus on advocacy work to ILFI—she had been working on setting up a new organization for that purpose when ILFI recruited her. And she’ll have her hands full figuring out... Read more

We have all these resources out here in the ether but it’s so hard to pull them into one spot! I was asked, last minute to join a client call today to help convince both the client (affordable housing developer) and the mechanical engineers to "stick with" a commitment to 100% electric design that was publicly stated when the competition was... Read more

Hi folks! Our AIA Seattle Committee on the Environment is hosting a series of decarbonization talks that might be of interest to this group. The next one is coming up next Thursday with the University of Washington. 

Details and free registration here: https://aiaseattle.org/event/cote-university-of-washingtons-pathway-to-d...

My apologies if I posted this question twice ont he forum - I am a newbie on this forum.

Anyone knows how to import an structural emobdied carbon project file into architectural project file of the same proejct to generate a combined Sankey graph?  My Building Transparency/CLF contacts haven't got back to me for a week now...

... Read more

I'm guessing this is the most impactful thing any of us could do over the next couple of years. Energy Codes are far and away the biggest lever that our industry has in fighting climate change. I'm up to my eyeballs in commitments at the moment but heartily encourage you (yes, YOU!) to sign up.

...

Hi all – if any of you are... Read more

Hi SDL: Please see attached letter to USGBC about the urgent need to address climate change in the next iteration of LEED v4. It's based on the realization that in the last few years it has become clear that climate change has become the dominant global threat to humans and our fellow species. And it has also become clear that the steep... Read more

Hello Gurus,

I’m writing to share with you an effort a small group of lighting designers from the Boston area started which is now rolling into a large scale effort.  We’ve put together a Lighting Advocacy Letter to accelerate the sustainability of lighting products. Inspired by the AIA Materials Pledge, the letter is intended to... Read more

Welcome to the quiz portion of Why Post-Occupancy Review Is the Future of Design (And How It Can Serve You Now).

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain the importance of post-occupancy evaluation (POE) for occupants and the opportunities in POE for architects.... Read more

Has anyone heard of floating solar technology? I can't think of an application other than covering power plant retention or agricultural waste lagoons. Covering up the sun on a natural body of water and adding electrical wiring seems like a bad idea. I am curious though if others have heard of this technology and have other (unbiased) ideas... Read more

ASHRAE 209 in all its glory has been uploaded. This will impact our architectural process, for better or worse, so we should embrace it and learn from it. The revised AIA Energy Modeling Design Guide (due out next year) has been timed to correspond roughly to 209 coming out and will include references to it. The first few energy modeling '... Read more