As the managing editor at BuildingGreen, Elizabeth oversees the day-to-day operations of the editorial department and writes and edits content for publications. As sustainability consultant, she leads components of consulting work related to sustainable strategy, organizational change, socially responsible practices, and stakeholder engagement... Read more

I am diving back into Sefaira for the first time in a while, and the program still seems to be missing the ability to account for automatic daylight dimming in energy savings. Previously I had used an LPD reduction equivalent to emulate the savings automatic dimming would provide. Has anyone done a similar work-around? 

I'm sure if I hop in the way back machine I could look in the forums and find old threads on LEED GA and LEED AP study resources, but I also know that material comes in and out of date. Has anyone found a good, current solution for firmwide LEED study materials?

We used to have some GBES resources, but those are intended to be person-... Read more

Welcome to the quiz portion of Certified Wood: How SFI Compares to FSC.

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe how forestry standards engage with pesticide use, protection of old growth forests and forest biota, and prevention of deforestation.
2. Discuss... Read more

Hi SD Leaders: I'm writing to get your help identifying any experts or projects where all-electric HVAC solutions are being implemented in a large new build healthcare/patient care setting. The client has raised concerns about the reliability of an electric re-heat system and its ability to promptly respond to temperature controls. They also... Read more

Calling all Sustainable Design Leaders - Coming up on March 1st, we’re hosting a virtual SDL check-in. We’ll have a round of five-minute presentations as well as a refresh of the SDL Steering Group.

Quick point of clarification: For those who’ve been around for a while, you may remember this group as the “SDL Regional Leaders”. As we’ve... Read more

Hello all, there has been a fair amount of discussion about the emerging Cove Tool for early stage energy modelling and parametric optimization at our firm. I am very curious if any of you are using this software, and if so, what are your thoughts about it? 

https://www.covetool.com/

Thanks,

Esteban Matheus

Hi all,

Just wanted to put a couple of useful webinars on your radars if you haven't heard of them yet:

#1: The Contractor’s Role in Quantifying and Reducing Embodied Carbon: Why, What and How

This webinar will provide an overview of what a contractor's role is towards embodied carbon reductions, and how two General... Read more

Hi All,

Attached is the DRAFT of our ZNE Data Report.  It is just the beginning. We have a lot more data to gather.  We didn't want to wait for it to be perfect to get it out. Hopefully this gives you all an idea of where we are headed.  Please continue to send us your projects in the Northeast.  I've also attached the excel doc for you... Read more

Hello SDL!

Has anyone set "Ecosystem Benefits/Service" targets for an individual project or for all their projects? I was previously against the idea of even measuring ecosystem benefits but I've had my mind changed in recent months!

Currently we want to set a target for every project to: "Improve ecosystem benefits on every site... Read more

Hi Everyone!  About ten days ago, Megan Zack posted a note announcing her new role as Chief Sustainability Officer at Wight & Company. (Yay!)  I'm so delighted that she will be stepping into this leadership role at Wight to shepard the firm in the next chapter of their journey in sustainability. 

I wanted to take a moment to say... Read more

This summit was pre-approved for 10 AIA LU|HSWs and 10 GBCI CE hours.

Please complete the survey question to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to the organization. Please check your profile to be sure your... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Hi All: I'm writing to see if I can get some recommendations/links to some great, free web tours of sustainable projects for use in an intro to sustainability class I'm teaching online this fall. Typically we tour some local buildings but that isn't an option this year. I'm hoping to find a few different ones for students to choose from. They... Read more

I am very interested to understand the deployment of LED temp jobsite lighting on a national level.  I think this all goes back to the low emitting jobsite.

1. Does your firm utilize temp jobsite lighting on your projects?  

2. Is this every project or a percentage of projects?

3. In your state or area is it prevalent, one... Read more