Hi Everyone,

Who has worked on a SITES certification and can share the approximate hours involved for administering and completing documentation? A relative sense of the effort compared to LEED would also be helpful, similar to the thread about WELL on this same subject. 

Appreciate any insight. Thanks! -Hilary

Hello - I have met several of you virtually over the last couple years. My name is Megan Zack and I am excited to share that I have changed positions and will be the Cheif Sustainabilty Officer at Wight & Company. After spending the last 20 years working as an architect with a small percentage of my time dedicated to sustainabilty, I'll be... Read more

Welcome to the quiz portion of No More Red Lines: Undoing Our Legacy of Urban Segregation.

Learning Objectives
Upon completing this course, participants will be able to:

Hi SDL!

Our CM recently offered up the possibility of substituting Pozzotive into our structural and paving concrete mix (www.pozzotive.com) on a large public building. Apparently it is on a level with the cost of standard cement.
We are eager to reduce the project's embodied carbon, and this seems almost too good to be true.

Hello, All, Is anyone familiar with One Click LCA software and resources?  Similarities/differences from a Tally or Athena approach?  Many thanks!

Hi all! I'm very excited to report that we have interest from a developer client in tracking embodied carbon through construction. We have issued construction documents and the construction managment team is begining the process to establish the GMP.

We're looking to use EC3, and/ or ZGF's LCA analysis tool for concrete to look at how we... Read more

Curious what people's 'best' experiences or recommendations are for load calculations and energy modeling regarding electrochromic glazing... hoping I can lean on others as it's just now becoming more of a talking point in our market here in Omaha. 

Specific questions including whether load and energy modeling software are separate (... Read more

Greetings!

Back again re: the work we're doing with City of Cambridge, in their great leadership efforts to develop EC policy/regs/incentives and reporting requirements.

Thanks to those who responded earlier about the effort it takes you to conduct WBLCA - now we're diving into it in more depth and wanting to get together a focus... Read more

We're expanding the capacity of our team, with two positions, a general project sustainability specialist as well as a more targeted position focused on the healthcare sector.

Healthcare Sustainability Specialist

Sustainability Specialist

In both cases, we're looking for smart, experienced people who understand the power... Read more

The opportunity for water savings from installing efficient toilets, and from toilet replacement, is significant. In addition to improvements to the traditional gravity system, pressure- and vacuum-assisted flushing systems are available that offer superior performance—albeit often with some increase in flushing noise.

Welcome to 2030 reporting season!

I brought up on the Fika today that there is a webinar December 5th to show updates to the DDx including the calculation of operational carbon from your energy data.  Below is a link to register.

https://aia.zoom.us/meeting/register/tZUocOutrTItHtWiySNMIqfGYv4ZbAhtjSg...

MSA has issued a safety advisory because they have received field reports that their green colored MSA V-Gard Protective Caps are cracking. Please share this with your safety staff if they do not already know. Let's keep everyone safe!

Welcome to the quiz portion of Reexamining Priorities in Green Building.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define green building priorities from a few different angles (separating process priorities from outcome priorities).
2. Differentiate those priorities... Read more

Hi all,

I am working on a Div 01 sustainability spec section for our firm to include by default on all projects. I've been finding a lot of great sample language out there for embodied carbon measures and material transparency (huge thanks to anyone here who had a part in developing those resources). 

One thing I'd like to include... Read more