Hi All,

Attached are the meeting notes from the Carbon Group's 2/26/20 -- also in the PDF are the slides presented in the 2/26 meeting.

Before our next meeting in late March/early April, we are looking for input on the following topic related to tracking and reporting carbon:

I am looking for a Mechanical Engineering firm in New York state who works in mid-sized commercial (ideally hospitality or multifamily experience) and who has experience with geothermal GSHP systems.

Just highlighting a tool from Circular Ecology (the group that brings you the Inventory of Carbon and Energy data) for measuring Scope 1 and 2

https://circularecology.com/organisational-carbon-footprint-tool.html

All, today is the day I had committed to sending out the DRAFT request to equipment manufacturers of what is needed for full electrification.  I apologize that I didn't have time or focus to get my thoughts together till now (I had intended to share this with Chris and others prior to sending to the full group, but just didn't get my thoughts... Read more

For those of you who are close to CLT and mass timber, has the jump in US wood price also impacted the pricing of CLT on your projects, or viability of CLT compared to the cost of steel or concrete frame buildings?  

If anyone has price data comparing CLT today to pre-Covid pricing or any metric that would describe the percentage change... Read more

Since starting at LPA last fall, the number one question I get from people outside the firm is how we are hitting (2018-2019) or getting so close to hitting the 2030 Commitment goals. 

Here is a chance to see for yourself! LPA is seeking a Sustainable Design Specialist to join our RED team (Research Education Design) - location open to... Read more

We're wrapping up a multi year project that went through multiple design changes, leaving us with a ton of material samples.  Does anyone know of a good place we could donate these samples to, to keep them out of the landfill.  I'm in the greater Seattle area.  Thank you for any suggestions.

Hi all - we have several projects where money from the IRA may be able to get projects farther. I've seen the AIA/USGBC webinar and done some other research as well. Does anyone know if there's a Higher Ed group that is chasing down how and when the money is available and for what exact purposes? Are you planning on using consultants to help... Read more

Hi folks,

We're currently scoping out a BuildingGreen report on how the global market for recycled/recyclable materials has changed over the years, and what that means for waste management practices in construction, and for the availability of recycled content materials. 

This ties into the goal from the SCL Summit about LEED... Read more

SDL Group -

Hi all!  After a brief hiatus from the group to move from New Orleans to Portland (OR), start a new job at ZGF Architects, buy a house, and  see my baby boy become a toddler (all in the past year!)---- I'm ready to plug back into the group.  Seeing folks at the ILFI conference re-energized me to reengage :)

So…..does... Read more

Hello Green Gurus!

Thank you to all who joined the cross-networks adventure that was the Sustainability Leaders Week: 2021 Summit-Palooza, all of us at BuildingGreen were so glad to share that time and space with you all.

We have been receiving a few questions about next steps, here are a couple details we wanted to share with you... Read more

Welcome to the quiz portion of Making Windows Work Better.

Learning Objectives
Upon completing this course, participants will be able to:


1. Understand when window attachments may be used in lieu of window replacements.
2. Summarize why optimal management of heat loss and gain may require both interior and... Read more

Hi - We have some projects within reasonable reach of ILFI's Zero Carbon Certification, which will require purchasing some off-site renewable energy. As a State Building Code Council member, I'm also eyeing the Zero Code which we will seriously consider in the next 12 months; this also requires a purchase of off-site renewable energy. 

I... Read more

Commonly used for interior partitioning of commercial buildings, light-gauge steel framing is increasingly being used in residential construction. Compared to solid wood, steel studs are lightweight, dimensionally stable, resistant to insect damage, and of consistent quality. 

BuildingGreen-Approved Structural Steel

Products... Read more

Biophilic design features are not just aesthetically pleasing; researchers have found that patients heal faster, workers are more productive, and children learn better when more elements of nature are present.

And yet there are still very few projects developed today that inspire a connection to life and the natural world. Some people... Read more

Were we given any warning that LEED Online and USGBC.org would be down for a week?