Looking for a recommendation for architectural renderings who would be interested in doing some work for a Direct Air Capture project. A friend is working on a project with Deep Sky and I'd love to make a connection to someone(s) affiliated with the network, if possible.

We are attempting to use Tally on a couple projects and are wondering how others are using the tool in their design process. If any experienced users out there would be willing to have a brief phone conversation I would appreciate it. Thanks

Team,

See this paper regarding outside air vs. filtration.

https://www.sciencedirect.com/science/article/pii/S0360132313002515

MERV-13 is a good way to get most benefits without a huge cost.

Best,
Luke Leung

Hi folks,

We have a really great webinar set up for Thursday, Oct 25 at 2pm eastern. This one is based on the 5-minute presentation from Heather DeGrella at the Summer Summit--our jaws were on the floor when she presented it there, and we were hungry for more.

Sign up here: https://zoom.us/webinar/register/... Read more

Hello! i had in my notes that the group interested in jobsite wellness was going to schedule a call mid-January.  I don't remember who was leading the effort.  does anyone have a list of who is on what committee?

thanks!

This webcast was pre-approved for 1 AIA LU|HSW and 1 GBCI LEED-specific CE hour.

Please complete the survey questions to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to these organizations. Please check your profile to be... Read more

Friends,

This is a personal note. My son was just diagnosed with Asthma. I’m started to wonder if it’s just coincidence that this corresponded with him starting kindergarten in a school where they clean with Chlorine bleach. I found substitutes for his small preschool and at home.  My understanding is that there’... Read more

Hi all - 

I have heard a good deal about SBTI in the last while and am wondering about this group’s firms’ engagement with them. We reported one year through CDP, and it was not very useful. It focused entirely on Scope 1 and 2 emissions, which are over 1000x times less than our semi-controllable Scope 3 (buildings’ embodied carbon and... Read more

Welcome to the quiz portion of EPDs Are the Future of the Building Industry, Whether You Like It or Not.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how environmental product declarations (EPDs) are made, what they tell you, and how they're best used.
2. Describe... Read more

Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

Hi All,

If you have 5 minutes, we would appreciate your input in the Google Spreadsheet (linked below).  If you only have 1 minute, feel free to reply to this forum post and list your the typical equipment vendors you spec on projects.  :)

We're asking each of you to enter your "Top 3" specified vendors for each of the products... Read more

Returning to work: for many, it’s unthinkable without some kind of reassurance that leadership and the facilities team have taken all possible precautions. Lots of organizations are weighing in on what we should pay attention to, but how do we know if it’s working?

The free Re-entry program from Arc is a tracking and measurement... Read more

Hi Green Gurus: check out this new series from AIAU that delves into the design and planning application of the 4th National Climate Assessment Report by region with some more recent updates. Free to members...looks like some great speakers and highly relevant. 

https://aiau.aia.org/regional-tour-climate-risk-planning-and-design

... Read more

I have been asked to recommend folks to join the AIA’s Framework for Design Excellence.  The AIA Framework for Design Excellence is basically the top ten toolkit, that has been rebranded by the AIA and is forming the backbone of much of the policy that the AIA is currently setting.

From the AIA's website:

Our firm is looking into our hiring process with JEDI objectives and looking for examples that have been successful. Just like any other firms, we utilize career fair opportunities from local Universities, we have scholarship & endowment programs for several institutions, which became a major pipeline. We are working on evaluating all... Read more

EDITED LINK

Hello, below is a link to our newly uploaded research report, Embodied Carbon in Commercial Furniture. This new research report introduces a case study and some new baselines for measuring the carbon footprint of commercial furniture, to add to a growing body of work on this topic among our peers:
Embodied Carbon in... Read more

Hi All -

I have a non-profit project that has a lot of wood structure to it, but the truss suppliers have both said they cannot get FSC wood for the project.

So, looking at the Legal Wood Pilot Credit, I need some help.  Can anyone tell me where i can find the definitions between "legal", "responsible" and "certified" are? (I'm... Read more