Welcome to the quiz portion of the Wood, Forests, and Embodied Carbon Webinar!

Learning Objectives
Upon completing this course, participants will be able to:

1. Explain the complex relationship between forests and carbon, with an emphasis on how carbon releases from forestry affect the sustainability of buildings that... Read more

As announced in last week's SDL/SCL Winter Summit, I have been working with a group of regional AEC professionals, industry stakeholders, and the New Buildings Institute on two code proposals to the 2021 Seattle Building Code that limit the Global Warming Potential (GWP) of concrete & steel in buildings over 50,000 sf (see attached).  We ... Read more

I am getting started on a research project to evaluate the feasibility, costs, and benefits of using phase change material (PCM) to passively regulate temperature in Minnesota buildings. If anyone has experience designing with PCM, installing PCM, or occupying buildings with PCM, can you share any lessons learned that would be relevant as... Read more

Hello Gurus,

I’m writing to share with you an effort a small group of lighting designers from the Boston area started which is now rolling into a large scale effort.  We’ve put together a Lighting Advocacy Letter to accelerate the sustainability of lighting products. Inspired by the AIA Materials Pledge, the letter is intended to... Read more

Are you getting questions, advice, and dubious sales pitches from all comers about how to design and run an HVAC system to combat infectious disease? You’re not alone. Engineers, facility managers, architects, and other building professionals are all... Read more

All--

A few months ago, I sent around a note about an article I was writing about the state of post-occupancy studies. It finally came out, in the latest issue of Metropolis. Great quotes and work from Payette, EDR, KieranTimberlake, HKS, and others. Thanks to all for helping with this.

I don't believe it's available online yet,... Read more

Recycled plastic paneling is an appropriate use for some of the various post-consumer plastic materials entering the waste stream—in particular, high-density polyethylene (HDPE) from milk and detergent bottles.

BuildingGreen-Approved Panels

BuildingGreen approves plastic paneling products with high recycled content—in some cases... Read more

Hi All,

I'm working on a LEED for Schools project under 2009, and received some amorphous comments back about our Mold Prevention Plan. We used the LEEDuser template as a guide, while also referencing the EPA document the credit is based around, but the reviewers feel we haven't provided proper metrics. The EPA plan is something like... Read more

ASHRAE 209 in all its glory has been uploaded. This will impact our architectural process, for better or worse, so we should embrace it and learn from it. The revised AIA Energy Modeling Design Guide (due out next year) has been timed to correspond roughly to 209 coming out and will include references to it. The first few energy modeling '... Read more

Hi all,

Are you looking for a senior level sustainable design position in Canada?  We’re hiring a sustainable design leader and senior sustainable design consultant with location options in Vancouver, Toronto, Edmonton, Calgary or remote (Canada only). https://dialogdesign.ca/careers/current-openings/

I joined DIALOG 10 months ago... Read more

Welcome to the quiz portion of A Guide to Selecting Sustainable Textiles.

Learning Objectives

Upon completing this course, participants will be able to:


As we begin to look into Scope 3 emissions reduction strategies, it's important to understand ways to reduce tranportation emissions to project sites. Is anyone aware of best practices or programs for contractor carpooling to jobsites? I know many of my colleagues travel to work together in one vehicle because of parking limitations, however,... Read more

For those of you working in jurisdictions with both prescriptive and performance-based commercial energy code pathways, roughly what percentage of your projects are using the performance pathway? How do your project teams decide which pathway to follow?

In Minnesota we are seeing very few projects pursuing the performance pathway,... Read more

Hello All! 

We are using TallyCat to extract quantities from our REVIT Model, and bring them over to EC3 to get a model GWP (focusing on material categories required to evaluate ILFI Zero Carbon certification).  There are a number of questions that are popping up!!

I am sure there are others trying the same thing, yes... maybe?! ... Read more

Curious if folks know of any resources on hempcrete, specific to durability.  We have a one-story carbon-neutral operational energy project where the design team and client have bought into the aesthetics and carbon-sequestering potential of hempcrete, and amazingly it is looking to be no more expensive than a more typical concrete wall... Read more

Hi gang,

Following up on the recent Air Quality Design Jam at the summit, I’d like to round up the folks interested in supporting an Air Quality Working Group.

Didn’t attend the summit? No worries – everyone is welcome! We had a good group the other week and several of us want to continue the conversation.

The design jam... Read more