Hi folks, 

A few of us at SERA recently connected with a couple of women in the tech industry who are looking to solve sustainability issues with new software. They're in the "problem definition" phase and are eager to hear from SDL members about the big issues around operational and embodied carbon that we're tackling. See below and... Read more

Since the launch of the Contractor’s Commitment in late 2020, nineteen companies have become signatories and many others are using the guidelines as a roadmap for their firms.   Now that the pilot year of the Contractor’s Commitment is complete, it is important to consider if and how the guidelines should evolve to be the most impactful.  Over... Read more

This summit was pre-approved for  6 GBCI CE hours.

Please complete the survey question to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to the organization. Please first check your profile to be sure your information is... Read more

Hi all,

Due to the eclipse, Nadav and I will be out on our usual call day, April 9th, and we anticipate others may as well. We will be moving the call to Tuesday April 16th at the usual time (2-3pm ET). For this meeting, we'll be holding a whiteboard session about MEP2040, the development of plans to achieve it, and tactics to getting... Read more

Welcome to the quiz portion of Resilient Design—Smarter Building for a Turbulent Future.

Learning Objectives
Upon completing this course, participants will be able to:


1. List three motivators for resilient design and at least three actions that address each motivator.
2. Explain why climate change isn't our... Read more

Currently, the BIT User site is fully accessible without having to log in (unless you want to edit or add content, of course). The time has come, however, to start restricting access only to logged-in users.

Which sections will be freely visible, and which will be visible only to registered users? Here's what I recall from our earlier... Read more

Thank you BuildingGreen for yesterday's fun news and much needed chuckles.  I really appreciated the GOOP article the most! I mean, dare I say, a kegel powered elevator - absolutely brilliant!

If you have not seen the April Fool's edition, take a look at the talent and time that was put into these stories.

https://www.... Read more

Hello Green Gurus! 

We are planning a virtual Show & Tell and Happy Hour for Oct. 30th 7pm - 9pm ET (4pm - 6pm PT) with a Halloween theme, bring your best costumes! We will hold presentations (virtually of course!) for about the first 1 hour and 20 minutes and then will transition to some fun Happy Hour festivities, sharing, and... Read more

Fluid-applied flooring (FAF), or resinous flooring, is made from various hazardous chemicals that can be released into the building, especially during application.

BuildingGreen-Approved Flooring

BuildingGreen selects FAF that meets CARB emissions standards AND either contains recycled content or offers other positive... Read more

Hello SCL peeps, 

Thank you to all the people who filled out our 2021 event survey. Your feedback did help us narrow down the options, but it was still inconclusive about whether there’s enough interest in doing an SCL-only Summit. 

To stay on schedule with our planning (and to make sure the event will pencil out financially), we... Read more

Hi folks,

In case you know someone who might be right for this Seattle-area gig:

The position is a Senior Program Manager with CBRE on the Microsoft account working with Katie Ross, MS Sustainability Program Manager, to deliver their sustainability program to their real estate globally. 

Here is the posting: https://cbre.... Read more

All,

Our firm has been struggling to find carbon reduction strategies for concrete that move us beyond a fly ash only approach. Frankly, the knowledge just isn't there internally or with our consultants. We've known that there are a few folks out there that have a deep bag of tricks, but we haven't had the chance to work with them... Read more

We are working on a large healthcare project in Minnesota.  We're setting sustainability goals a bit late - no certification, but targets with accountability.  I'm working to determine recycled steel content (for structural steel and rebar), and I've gotten a bit of push-back on recycled content based on being in the region of the Iron Range... Read more

Folks, would love to hear what software you're for in-house daylighting/energy performance modeling at the SD/DD level. My IT folks have been pushing us to try out Autodesk's Insight again after a not so impressive pilot we did a few years ago. Has it gotten better? Was it us? What programs do you feel good about? Which ones really make you mad... Read more