Commonly used for interior partitioning of commercial buildings, light-gauge steel framing is increasingly being used in residential construction. Compared to solid wood, steel studs are lightweight, dimensionally stable, resistant to insect damage, and of consistent quality. 

BuildingGreen-Approved Structural Steel

Products... Read more

It’s Earth Day! In celebration, we’re offering full Premium subscriber access to BuildingGreen content, news, and product guides for all Peer Network members for the next six months. 

We’re sharing this unbiased, rigorous content with you through the coming summer and fall, with access to our: 

Premium content, guides, and... Read more

Hi all, we are embarking on an effort to standardize our LCA process in order to maintain a firmwide database of embodied carbon intensity from which we can create internal baselines and targets. I was wondering how other offices are setting boundaries for their LCA efforts. Below is our starting point. Most LCA will be conducted using Tally.... Read more

Hi all,

As follow-up to the summit, I’m attaching a draft letter on MEP embodied carbon written by our group (Luke, Kristy, Adam).  The goal is to start a dialogue with manufacturers to include embodied carbon info for major equipment.  Will explain more on the call.  Please read in advance if you get the chance!

Thanks!

This summit was pre-approved for 3.5 AIA LUs and 3.5 GBCI CE hours.

Please complete the survey questions to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to the organization. Please check your profile to be sure your... Read more

Remember 2013? LEED version 4 had just been released to the public. Hardly anyone was using it, though—not only because they didn’t have to, but also because there just wasn’t a pathway to achieve many of the new credits in the rating systems. Especially the product-related credits in the Materials & Resources category, along with the Low-... Read more

I'm sure may are familiar with Aqua in Chicago, and Joe Lstiburek's article on thermal bridging. (https://buildingscience.com/documents/insights/bsi062-thermal-bridges-redux) We have similar problem with a project that is a residential highrise building, concrete structure. Here is my questions. Will energy simulation be able to pick up the... Read more

Hi All,

We’re planning a conference here in Boston, October 23rd & 24th, focused on Designing for People.  We’re rounding out our speaker lineup and I thought I’d reach out to you all for ideas.  If you had an all-star list of people speaking on Health and Wellness in the Built Environment who would be on that list?  Send me 3 names... Read more

Does adding solar panels reduce a building's EUI?

Existing operational use of a building is 80 kBtu/sf/year. When we add solar, it will change the source of energy but does not change the usage.

My understanding is that the EUI does not change, but it would be good to hear from others.

It's energy consumption at the point... Read more

Hello everyone,

Here's a reminder that our next monthly call will be taking place next Tuesday, September 10th at 2:00pm EST.

Please feel free to join us!

Join Zoom Meeting
https://zoom.us/j/661110941
Dial by your location
        +1 929 205 6099 US (New York)
        +1 669 900 6833 US (San Jose)... Read more

Welcome to the quiz portion of Solar Thermal Hot Water, Heating, and Cooling.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain active and passive; direct and indirect; and low-, medium-, and high-temperature solar thermal systems.
2. Distinguish between the three most... Read more

Happy Friday, SDL!

We're running a Tally WBLCA for an environmental education center, which has a very small floor area but a fairly robust concrete/steel structure. Still, I was surprised to find an intensity of over 1,000 kgCO2/m2 for the building.

This is way higher than the general benchmarks I've found in the CLF's database,... Read more

This month on our Sustainable MEP Leaders call we were asked what resources would be suggested for advancing integrative design.

Two books immediately came to mind for me:

How Building Learn, by Stewart Brand

https://en.wikipedia.org/wiki/How_Buildings_Learn

It was many years ago but reading Stewart Brand’s How... Read more

Hello! Long shot here, but I thought I would try.

Alex Wilson and I are working on an article about priorities for the next four years under the Biden-Harris administration. We'd like to feature some recent photos of climate demonstrations, protest signs calling for the Green New Deal, or other environment-focused illustrations of... Read more

Hi all,

Passing on a message from Julia Siple at AIA who is conducting a series of focus groups related to the AIA 2030 Commitment's DDx platform. You may have already received this from other channels but I thought I'd post here as well in case it got missed. They are looking for more participants in the morning and lunchtime (lunch... Read more

BuildingGreen is the most trusted voice in sustainable design and architecture.

This ad-free, member-supported resource is here to guide designers in using high-performance strategies, and in selecting sustainable and healthy products.

If you haven't already, start by creating your unique user profile to get your log-in, and be... Read more